VIEW MY

TedW

Handyman / Property Maint

Gift Premium Subscription To TedW

Join Date:

09-22-2013

Last Activity:

10-26-2013 11:45 AM

1 Likes on 1 Posts 

LATEST ACTIVITY

  • Posted in thread: What substrate for torch down on unheated roof? on 10-26-2013 at 10:45 AM
    Well, I haven't received a response from the customer yet. I think she plans to put it off till
    spring, against my better advice because A) it just that much more snow melt that's going to
    seep into t...

  • Posted in thread: What substrate for torch down on unheated roof? on 10-25-2013 at 01:09 AM
    Thanks. I was looking at the Liberty system on you tube the other day and it does look pretty
    straight forward. [ame] price the materials and run it by the customer, see what she thinks.
    Wish me luck...

  • Posted in thread: What substrate for torch down on unheated roof? on 10-24-2013 at 12:10 PM
    Update, the customer is not bent on using the same material as the main roof, so I'm open to
    other options. Here's some pics of what I'm dealing with. The roof has almost no pitch at all,
    maybe 1" in ...

  • Posted in thread: What substrate for torch down on unheated roof? on 10-24-2013 at 09:48 AM
    Thanks oldognewtrick. I guess I should have first asked which is better? The home owner wants
    the same thing she has on the main roof of the building, which is GAF Ruberoid torch-down white
    granule. I...

  • Posted in thread: What substrate for torch down on unheated roof? on 10-24-2013 at 01:04 AM
    I'm looking at replacing a small roof over a front porch. It's very low pitch, about 1 or 1-1/2
    in 12, so I'm thinking a torch down is the best option. When I tear off the old roof I pretty
    much know ...

  • Posted in thread: Whirlrpool type tub, mold in system on 09-22-2013 at 03:48 PM
    Thanks Neal, that's just what I needed. The bad news is the article mentions some manufacturers
    recommend against using bleach, as it may eventually dry out any internal rubber seals. So my
    advice to ...

  • Posted in thread: Help identifying shower hardware on 09-22-2013 at 12:56 PM
    Chris, you mentioned the stem being so long you would need a really deep socket. I use deep
    sockets from my 3/8" or 1/2" ratchet set and let the stem poke through the hole where the
    ratchet handle wou...

  • Posted in thread: Whirlrpool type tub, mold in system on 09-22-2013 at 12:38 PM
    Hi all, I hope plumbing is the right forum to post this. A whirlpool tub in one of the rental
    units I manage is leaking what appears to be black mold from a couple of the jet outlets. The
    tenant in th...

0 COMMENTS
POST A COMMENT