tglombardi

LATEST ACTIVITY

• Posted in thread: Hardwood flooring-checkered pattern on 07-16-2012 at 12:12 PM
  4107Here is a picture

• Posted in thread: Hardwood flooring-checkered pattern on 07-16-2012 at 05:33 AM
  All, just want to see what people have done to sand a hardwood floor that is installed in a
  checkered pattern. The direction of the grain is different. I have sanded floors before and
  have always gone...

• Posted in thread: Ice and water protection on 04-24-2012 at 05:39 AM
  Wow. That makes a lo of sense, the fact that it's different in the south. So it seems we are
  all doin it right based on region. In terms of the 3/4 inch strips I add, it doesn't make it
  harder for the...

• Posted in thread: Ice and water protection on 04-19-2012 at 08:17 AM
  Good point. The drip edge also provides an avenue to get into the gutter. Another overkill step
  I do is add 1 1/8 inch piece of pt plywood (ripped down) against the fascia board so the drip
  edge sits ...

• Posted in thread: Ice and water protection on 04-19-2012 at 06:59 AM
  That is very interesting. That is why I asks the question because there doesn't seem to be a
  definite answer. I think the way I have been doing it works great.

• Posted in thread: Ice and water protection on 04-18-2012 at 09:12 PM
  All the installation specs I've seen show the drip edge installed first, then the ice and water
  shield. Water should always be allowed to shed with out restrictions, putting the drip edge
  over the wat...

• Posted in thread: Ice and water protection on 04-18-2012 at 05:13 AM
  Hi allJust wanted to get your thoughts on this. I have been roofing for about 6-7 years and
  have always put the ice and water protection on the first 3 feet and then the drip edge over
  the ice and wat...