Last Activity:07-04-2008 7:01 PM
Posted in thread: Toilet only half flushes on 07-15-2008 at 06:16 PM
Sorry for the delay, but life gets busy sometimes.I tried cleaning the jets with a hanger, but
I didn't have much luck. My wife came across a tip that suggested to pour some water down while
Posted in thread: Toilet only half flushes on 05-23-2008 at 11:01 PM
Thanks for the replies. Flushing twice doesn't help, the stuff that floats just floats. Holding
down the handle doesn't help either. Thanks for the link handyguys, I'll have to read through
it when I ...
Posted in thread: Toilet only half flushes on 05-20-2008 at 08:06 PM
Usually when we flush our toilet it only lets about half the water out of the bowl, but
occasionally it will completely flush. I don't know hardly anything about toilets so I don't
know what the culpr...
Posted in thread: Strengthen floor for aquariums on 05-04-2008 at 07:48 PM
I got it all done. I wanted to show pictures of how the reinforcements looked and stuff, but I
kept forgetting the camera as I put them in, then when I finally remembered to bring it the
Posted in thread: Shingles blown off. on 04-25-2008 at 06:28 PM
I will be careful.Thanks for the tips handyguy.
Posted in thread: Shingles blown off. on 04-24-2008 at 12:19 PM
Thanks Glenn, I will pick up some nails and gets those shingles replaced.
Posted in thread: Shingles blown off. on 04-23-2008 at 11:26 AM
This last weekend we had a lot of wind and some of my shingles blew off. It just so happened
that there were some shingles in the shed, I guess left overs from when the roof was done. Can
I just go up...
Posted in thread: Strengthen floor for aquariums on 04-10-2008 at 05:42 PM
Thanks for the tips. Now I have something to start from. I'll keep you posted on how things go,
it may be a few weeks it's finals time and so things are pretty busy at school.
Posted in thread: Strengthen floor for aquariums on 04-07-2008 at 09:50 AM
I am just about ready to start with the concrete and having never done anything with concrete
am looking for advice and tips on how to best do it.I got some of the 12" diameter round forms
on the advi...
Posted in thread: Strengthen floor for aquariums on 04-01-2008 at 06:57 AM
Boy, digging is time consuming.
- Carrier HVAC - Fan not turning
- Musky smelling rugs
- Builder's Joke Thread
- One Word Game
- Floor Drain for AC Condensate Discharge
- Popping tiles
- Can you tell me what it is called, please?
- wiring thermostat
- Stucco Job
- Stainless Steel Fridge
- moisture from missing singles at roof peak?
- Shower pan
- Transistion problem
- Tub soft spots
- My cat is a moron, again
- Re attaching flagstone in walkway