VIEW MY

Thomas529

Gift Premium Subscription To Thomas529

Join Date:

06-08-2013

Last Activity:

11-20-2017 1:11 PM

Likes Given: 2

3 Likes on 3 Posts 

  • Thomasville
  • GA

LATEST ACTIVITY

  • Posted in thread: Burried on 11-26-2017 at 02:53 PM
    I took the cover off (there was a lot of silicone on the gasket).There was no connections
    inside. Just a pull point I guess.I cleaned off the dried silicone, applied more and put cover
    back on.All is ...

  • Posted in thread: Burried on 11-20-2017 at 07:11 AM
    Open it up and tell us what you see.Do you really think that's a good idea without killing the
    power at box?If all it is is a pull point, no problem. But if there are connections
    inside.......

  • Posted in thread: Burried on 11-20-2017 at 07:06 AM
    The grey PVC goes from meter box down outside wall and then runs under Foundation to inside
    breaker panel. The LB is where it makes a 90 degree outside partially burried.Hopefully it's
    only used to pu...

  • Posted in thread: Burried on 11-15-2017 at 06:46 PM
    Was removing some mulch from flower bed and came upon a 2 inch LB box burried about 3/4 in
    dirt. This box was used to make transition from outside panel to go under slab to house and
    panel. I know ele...

  • Posted in thread: Attaching ledger to brick Fireplace on 07-31-2017 at 08:11 PM
    It is fireplace brick about 20 yr old.

  • Posted in thread: Attaching ledger to brick Fireplace on 07-31-2017 at 08:39 AM
    Any suggestions as to how many tapcon and what size? The 2x4 ledger will be 4.5 ft long and the
    mantel will weigh approx 20 lbs. it will be a floating mantel so no other support.Thanks

  • Posted in thread: Question on wood weight on 07-20-2017 at 05:26 PM
    Is there a way to approximate the weight of a mantel I plan to build?The mock up I built of
    pine weighs 16 lbs. I want to build the finished mantel out of either solid cherry or cherry
    ply. Based on w...

  • Posted in thread: Mfg wood floor over concrete slab brick fireplace transition on 07-18-2017 at 10:24 AM
    Thanks for your reply.I know the floor has to float, but was thinking if I nailed thru the
    molding into the flooring (and no further because concrete slab) the floor could still move. I
    really wouldn'...

  • Posted in thread: Mfg wood floor over concrete slab brick fireplace transition on 07-18-2017 at 09:39 AM
    That helps

  • Posted in thread: Mfg wood floor over concrete slab brick fireplace transition on 07-18-2017 at 09:02 AM
    In the process of fireplace remodel. Installers of wood floor used quarter round to hide the
    gap where wood meets brick fp hearth. They mailed into the grout and almost all the nails
    failed.Is there a...

0 COMMENTS
POST A COMMENT