Gift Premium Subscription To tinner666

Join Date:


Last Activity:

11-02-2009 12:07 AM

1 Likes on 1 Posts 


  • Unknown
  • Roofer
  • Frank Albert
  • Male
  • 45th.St, Hagerty La,


  • Posted in thread: Need help on Siding issue ASAP on 02-19-2009 at 02:04 PM
    "Oh and if any of you are cheating by not locking the vinyl in I feel sorry for your clients
    plus it voids the warranty on your vinyl and that is straight from Kaykan. Cause that would end
    up being th...

  • Posted in thread: My brother did a reroof w/out permitting??? What now... on 02-19-2009 at 01:54 PM
    "they did not do the extra nail off, and did not seam seal the butt joints with a peal and
    stick(I think thats what they require), " Are you talking about the plywood?Florida is anal
    about glueing thn...

  • Posted in thread: help please with streaking!!! on 02-19-2009 at 01:50 PM
    Getting rid of the rusting screws should/may prevent more streaking. If you get it clean, it
    may stay clean. Honestly not sure. Was the link helpful at all? I wanted it to be informative
    for pros and ...

  • Posted in thread: How to flash/mount new window install with only T1-11 siding, sheathing! on 02-19-2009 at 06:29 AM
    Hopefully the window flashing details, at a link in my signature site will help give you some
    ideas. I did not address T1-11 in the tutorial, but a little adatation may save the day.
    Possibly, cut the...

  • Posted in thread: Need help on Siding issue ASAP on 02-19-2009 at 06:17 AM
    F150, Here's a pro tip. A pro would start by measuring vertically at both corners to see if the
    dimensions were the same. All attempts would be made to resolve any serious errors before
    installing the...

  • Posted in thread: help please with streaking!!! on 02-19-2009 at 06:15 AM
    That streaking comes from the nails in the nailing fins, as a rule. I'de be more worried about
    the water that satys behing the siding and often does damage there. You might want to check
    behind the si...

  • Posted in thread: How to repair hole in Standing Seam Metal Roof on 02-03-2009 at 04:31 PM
    First, you have to gently unlock the standing seams about 4' on each side of the hole. Only a
    little bit at a time or you will tear the metal. The transiton area of unlock should be about
    12-18" from ...

  • Posted in thread: Sealing J channel on 02-03-2009 at 04:19 PM
    If you google 'window flashing', you'll find useful links about siding leaks and siding/window

  • Posted in thread: Roofing dilemma on 07-15-2008 at 08:18 PM
    I think $500. per square will be closer to the mark. I never charge less than $600, and often

  • Posted in thread: window/j channel /siding question on 05-06-2008 at 04:48 PM


Newest Threads