VIEW MY

tooltime

Member

Gift Premium Subscription To tooltime

Join Date:

06-19-2006

Last Activity:

10-24-2006 11:50 PM

LATEST ACTIVITY

  • Posted in thread: 1 wire short on 10-23-2006 at 12:09 AM
    The old wire could possible be stapled down. I doubt that it would be in the walls if it was
    put in more recently than the contruction process. It may be tacked along joists or something
    before it ent...

  • Posted in thread: New 22% Efficuent Solar Cells on 10-18-2006 at 12:40 PM
    I say, about damn time! :D That still means 78% potential missed, but at least it's a step in
    the proper direction :( The SPR-315 solar panel is based on the company's brand spankin' new
    Gen 2 solar c...

  • Posted in thread: Basement: Latex under Wallpaper on 09-20-2006 at 02:31 AM
    If the paint is coming off, the paper drywall covering may be coming off. If so, I would
    suggest trying to scrape off any of the loose, fuzzy fibers without damaging the drywall.
    Possibly sandpaper. L...

  • Posted in thread: Removing Viynl Help on 09-20-2006 at 02:21 AM
    A hair dryer (or other non-flamable heat source) might soften it up enough.I am sure there are
    other options floating around.. but none are coming to me at the moment.

  • Posted in thread: Additional heating in Kitchen. on 09-20-2006 at 02:18 AM
    Thanks Kerrylib & bethany14. I would love to do radiant heating, but I am keeping my fingers
    crossed to remodel in the next year or 2.. doubling the square footage , and re-locating the
    kitchen. If it...

  • Posted in thread: Countertop Refinishing/Overlay? on 09-20-2006 at 02:10 AM
    Thank you Kerrylib, that is exactly what I was trying to find. :D

  • Posted in thread: Countertop Refinishing/Overlay? on 09-15-2006 at 02:50 PM
    I had stumbled across a product, or article about a product for refinishing your counter a ways
    back. I believe it was either a stone base (Sileston) or plastic (Corian) product. Tit was not
    thick lik...

  • Posted in thread: Self build customs.. or off the shelf cabinets? on 09-15-2006 at 02:40 PM
    Well, another project Iím considering forcing myself into, is to build the cabinets in my
    kitchen. I really really hate the thought of using particle board pre-builts, or assemble
    yourself cabinets at...

  • Posted in thread: Starting to re-wire kitchen. on 09-15-2006 at 02:15 PM
    Two things. Yes, I forgot to mention. The micro CAN share a receptacle with an all gas range.
    This is fine.You CANNOT share ANY lighting with kitchen receptacle circuits. You can have
    "lighting only" ...

  • Posted in thread: Additional heating in Kitchen. on 09-15-2006 at 03:11 AM
    While the attached image is not to scale, it should give you a decent idea of what I’m
    looking at. The existing vent (Wall A) Is also for the Living room. The table, will mostly be
    against Wall ...

FORUM SIGNATURE
If you want it done right, guess you gotta do it yourself.
0 COMMENTS
POST A COMMENT

Newest Threads

LATEST SPONSOR DEALS