Last Activity:07-24-2007 4:37 PM
Posted in thread: Hardiboard and OSB on 07-23-2007 at 08:57 PM
Thanks for the suggestions. Not too new to power tools, but most of the work I do is with
metal. If we decide to remove that strip of osb I think I will work it out with a backsaw and
chisel. Anyway, ...
Posted in thread: Hardiboard and OSB on 07-23-2007 at 07:43 PM
How do I use a sawsall without cutting all the way thru the main 1 inch ply floor? I have a
hand backsaw, maybe that would be better?Also, after doing more measuring, it looks like the
carpet and the ...
Posted in thread: Toilet Flange Height Problem on 07-23-2007 at 05:21 PM
I know this is a common issue. I have searched a lot. Still looking for advice. We are putting
in a new tile floor. I have rebuilt the sewer pipe as low as I can get it, at this time the ABS
pipe and ...
Posted in thread: Hardiboard and OSB on 07-23-2007 at 05:07 PM
We decided another way to handle this would be to lay some plywood down the same thickness as
the osb and then lay the hardiboard on top of this. This would mean the overall floor thickness
will be 1/...
Posted in thread: Hardiboard and OSB on 07-22-2007 at 05:09 PM
Thanks for the info! I like the idea of using the thinset. It sounds like I can apply it at an
appropriate thickness to make things flush.
Posted in thread: Hardiboard and OSB on 07-22-2007 at 08:53 AM
We are putting tile in our bathroom. We just removed the OSB particle board from our bathroom
floor. We have several questions. (1) We could not remove all of it, there is a 2 inch strip
along two wal...