Last Activity:06-19-2009 6:35 AM
Posted in thread: Kenmore Evenheat - no heat even after replacing EVERYTHING! on 06-20-2009 at 09:29 AM
resistance. Could it be that BOTH relays are bad? If so, then how would the motor still run
normally?I then did a live test with the dryer running in heated dry. The relay connected to
the heater circ...
Posted in thread: Kenmore Evenheat - no heat even after replacing EVERYTHING! on 06-20-2009 at 06:37 AM
I just swapped the motor relay with the heater relay, since the motor was running fine before.
Now the motor will only stay on if I hold the start button in and the heater element still
isn't firing u...
Posted in thread: Kenmore Evenheat - no heat even after replacing EVERYTHING! on 06-19-2009 at 05:13 AM
My electric Kenmore Evenheat dryer intermittently wasn't producing any heat. Recently, it
stopped heating altogether.I tested all of the possible components with a multimeter per the
tech sheet (inclu...
- One Word Game
- question about water from central a/c
- deck roof and gutter question
- Possible mold problems??
- A little help with hardware, please?
- Aggressive Deer
- Suggestions on how to repair
- Crumbling, 'spaling' exterior foundation walls
- pressure washer advice
- Toilet will not fill
- Fire Safety
- Attaching wood post to concrete slab
- soffit vent ?
- Driveway Resurfacing
- Lennox A/C isn't cooling