Last Activity:09-12-2014 12:45 PM
Posted in thread: Gutter Repair? on 05-11-2009 at 08:03 PM
I was taking down a 45 foot blue spruce that died in front of our house and one of the crowns
came down and just kissed the corner/end of the rain gutter and crunched in a 1 foot section on
Posted in thread: 2 circuits on a 3 wire on 04-14-2009 at 11:11 PM
The dedicated 20a bathroom circuit can be shared among bathroomsSo long as it feeds only
outlets in the bathrooms & only the bathroomsI don't recommend itLemme See, I came across this
situation when p...
Posted in thread: 2 circuits on a 3 wire on 04-14-2009 at 10:59 PM
Look, in my reply, I said (I think). Now what had me concerned was this talk of phasing wires
and sharing neutrals. It is not a code issue to have two seperate circuits from seperate wires
in the same...
Posted in thread: 2 circuits on a 3 wire on 04-14-2009 at 07:54 AM
Good Job! I just wish the licensed electricians that wired up the bathrooms in my home were
able to realize what you have.Aw Shucks! I installed another panasonic product downstairs
bathroom but witho...
Posted in thread: 2 circuits on a 3 wire on 04-13-2009 at 10:33 PM
LOL"I have never heard of running a dedicated circuit to heat section of fan. Can you direct me
to that code? So I can educate myself."Sorry that you haven't! 2008 NEC: Bathrooms are required
to have ...
Posted in thread: 2 circuits on a 3 wire on 04-13-2009 at 08:32 PM
My project passed both electrical and mechanical final inspections this morning!!!Thanks to
everyone for their interest!!!cheers:D
Posted in thread: 2 circuits on a 3 wire on 04-04-2009 at 07:26 PM
Correction to my previous post where I stated:"You can share a neutral conductor between two
individual circuits as long as they are from opposite phases in the load center (i.e.-slots 1&3
are on the ...
Posted in thread: 2 circuits on a 3 wire on 04-04-2009 at 12:22 PM
No worry, it's just a personal preference thing w/me. I don't like to see wirenuts in a load
center and I've never seen any diagram in any of your posts. I'm always hesitant to redirect
Posted in thread: 2 circuits on a 3 wire on 04-03-2009 at 01:16 PM
KOK Man thanks for looking. I appreciate a place like this where people can come in and get
help doing some of this stuff...Now I have learned a different aspect of wiring which I will
read up about w...
Posted in thread: 2 circuits on a 3 wire on 04-03-2009 at 10:08 AM
not even sure what I'm looking at in the second pic but, don't like what I'm looking at if I'm
seeing it correctly. And the first pic isn't close enough to read anything, it's just an
exposed load cen...