Gift Premium Subscription To viper

Join Date:


Last Activity:

09-12-2012 6:08 PM


  • Posted in thread: Replacing fluorescent fixture on 09-03-2012 at 05:01 PM
    Sometimes you can pry the plastic grommet out with needle nose pliers or using a screwdriver.
    There is sometimes a spot where you can pry the grommet open or out. The aluminum piece is
    probably a clip...

  • Posted in thread: Weird 3-way switch behavior on 08-29-2012 at 10:48 PM
    Could be a loose neutral somewhere and if the light bulb is still in essentially hot and
    neutral are connected through the light. what I would do is disconnect all wires in both boxes
    and light fixtur...

  • Posted in thread: wire doubling up Neutral bar slot. on 08-29-2012 at 10:27 PM
    There should only be one neutral per hole and with the grounds you can put two as long as they
    are the same gauge wire. Also you should not pigtail these wires. You are not supposed to have
    junctions ...

  • Posted in thread: In Ground Pool Wiring Help on 08-29-2012 at 10:11 PM
    Petey is correct , pool equipment needs an isolated and insulated ground. Also when you hook
    these up to the new sub panel at pool you want to make sure that your ground and neutral runs
    are not bonde...


Newest Threads