VIEW MY

voyager

Gift Premium Subscription To voyager

Join Date:

01-07-2014

Last Activity:

08-22-2017 5:39 AM

Likes Given: 25

24 Likes on 16 Posts 

LATEST ACTIVITY

  • Posted in thread: Change out a 15 amp breaker for a 20 amp? on 08-22-2017 at 12:28 AM
    Yeah, tearing out dry wall is a no-go. If you'd of seen M'Lady's face when I mentioned that
    you'd understand. But, I do like the conduit idea.The breaker box has no empty slots for a new
    breaker to be...

  • Posted in thread: Change out a 15 amp breaker for a 20 amp? on 08-21-2017 at 04:18 PM
    Thanks neiltw and snoonyb.I was afraid of that. My first thought is that running new wiring up
    the wall from the breaker box, across the attic space, then down the wall to the receptical is
    a major op...

  • Posted in thread: Change out a 15 amp breaker for a 20 amp? on 08-21-2017 at 03:45 PM
    Our house has only 2 electrical plugins on the exterior. 1 is solely for the use of the water
    pump.It is inside the enclosure for the pump.The other is on the screened lanai and is being
    used to run a...

  • Posted in thread: Best Way to Deal With a Slipery Roof?? on 08-21-2017 at 02:51 PM
    We have black alge growing on our metal roof. M'Lady thinks it is very unsightly.I agree. It
    is. It doesn't bother me as much as it does her.But, I've seen where either a snail or slug has
    been eating...

  • Posted in thread: My Roof Repair Project Has Begun - Phase 1 The Pergola on 05-05-2017 at 03:36 PM
    Thanks nealtw,I've mentioned elsewhere that I have been a hyperactive most of my life. But, my
    metabolism has been slowing down the last couple of decades. Even so, I still have a very short
    attention...

  • Posted in thread: My Roof Repair Project Has Begun - Phase 1 The Pergola on 05-05-2017 at 05:45 AM
    I finally made some visible progress on this project today. Got the post and anchor tie
    installed a few days ago. post has been epoxied on the bottom 6". I didn't use the epoxy
    anchor cement. I went ...

  • Posted in thread: My Roof Repair Project Has Begun - Phase 1 The Pergola on 04-04-2017 at 06:22 PM
    OK, the rotary drill - hammer arrived yesterday.I put it to work today.I am very happy with it.
    It did the job very nicely and quickly.In about 20 minutes I drilled 13 or 14 ea 12mm holes
    around the a...

  • Posted in thread: Roof repair Project Phase 2 - Back Lana on 03-22-2017 at 03:55 PM
    Well, It looks as if I'll need to think on this a bit more. The ridge cap is nailed on at every
    ridge in the roof panels, They must have been afraid someone was going to try picking the house
    up by th...

  • Posted in thread: Video Sender on 03-22-2017 at 01:10 PM
    If I'm reading your question correctly, it sounds like you need to set up a wireless home
    network to get what you want. Of course that means you'll need all the components you want to
    work with it to ...

  • Posted in thread: Roof repair Project Phase 2 - Back Lana on 03-22-2017 at 12:37 PM
    I do not mean to discount your being correct about it not being fully effective in the OSHA
    type standard it is trying to fulfill. You are right! My need is not for safety, but for
    feeling safe. Plus,...

0 COMMENTS
POST A COMMENT