Last Activity:09-05-2007 9:31 PM
Posted in thread: Sump Pump Question on 04-26-2007 at 01:36 PM
A little confused, but most times a sump is in place for a reason, and the pump sits, there for
years if need, just in case.So, as far as a not so permanent installation, you want to just
pump some wa...
Posted in thread: I lifted my house BUT on 03-24-2007 at 10:57 AM
But thanks for not answering my question........gave me a good chuckle this moring....anyway, I
agree with Glen, I would get the straight/square side down and use whatever method is best to
Posted in thread: hi from canada... on 02-25-2007 at 08:03 PM
Welcome...from another BC Canuck!
Posted in thread: base molding for round corners on 02-19-2007 at 09:36 PM
Hey Donna,As far as round base corners, usually you can buy the rounded part seperate, and
continue the straight runs after that with longer pieces.Just do a search for "round base
moulding corners", ...
Posted in thread: Stuck Deck Door on 02-17-2007 at 01:41 PM
Hello bigw,First, I would not be keen on "grease" since it can be a real magnet for dirt,
debris, making a bigger mess. There should be an adjustment on the ends of the door at the
bottom, for height ...
Posted in thread: Bad honeywell valve? on 02-01-2007 at 11:06 PM
Sent you a PM, Blueforester.I ended up calling a dealer about 400 miles away, since he knows it
won't hurt his business locally sharing info so far away and got the contact numbers. I know
the valve c...
Posted in thread: Bad honeywell valve? on 01-11-2007 at 09:15 AM
When the fan is running, such as it does before firing up, gently give the wires a wiggle/bump,
going into the control valve. The Heil furnaces (not sure all the models, but same basic units)
Posted in thread: looking for deck drainage solutions.... on 11-17-2006 at 04:14 PM
What about nailing sheets of chloroplast underneath, with a slight slope for draining? It comes
in several clour options,large sizes (less seams) relativley cheap and quite durable.
Posted in thread: Is this a site to join and sell your junk now? on 11-17-2006 at 04:11 PM
Thanks, I see all the posts have been removed!
Posted in thread: Is this a site to join and sell your junk now? on 11-17-2006 at 09:45 AM
Just want a mod to notice a new individual who has joined tonight and using this forum as a
place to sell his junk, not contributing anything, just using the site basically .Forgive me if
I'm out of l...
- Tearing up ground level deck to deal with drainage issues at rear of house
- Small hairline cracks in fiberglass balcony
- Granite Installed - Possible Issue?
- What's that smell?
- Floor Drain for AC Condensate Discharge
- Fastening to vinyl siding
- Builder's Joke Thread
- Removing Shower Door/Frame Nails?
- Stainless Steel Fridge
- One Word Game
- Building a Time Machine
- New construction door in pole barn with ribbed aluminum siding
- Need to temporarily remove A/C to replace decking
- Replacing Prehung Front Entry Door in Stucco
- My cat is a moron, again
- preparing yard for grass