Last Activity:09-24-2009 8:12 AM
Posted in thread: Im tired of slipping when walking on my wet porch...HELP on 09-23-2009 at 09:14 PM
know this is an old post but,,,its not difficult to regrade a porch to provide positive
waterflow altho you won't find the mtls at any apron store,,, instead, look for a const supply
house OR a dec co...
Posted in thread: Building a cement driveway on 09-21-2009 at 05:45 AM
i'll sit in the back row for a bit :) promise i won't make noise during rest period :p
Posted in thread: Building a cement driveway on 09-19-2009 at 06:46 AM
nestor & i share parallel lives but i digress,,, obviously you're all right & i'm wrong &
that's fine,,, however, time is a precious resource & the op's questions better're answered in
basic apron sto...
Posted in thread: Building a cement driveway on 09-10-2009 at 07:11 AM
i'll let the administrator respond to your questions incl water/cement ratio, slump, redi-mix
vs bag, finishing, forming, placing, curing, jointing, base prep, ad nauseum for all the other
Posted in thread: Building a cement driveway on 09-09-2009 at 03:41 PM
these forums are for more specific questions - you best bet's to grab up a concrete book at any
apron store - good luck !
Posted in thread: Remove masonry nails on 09-09-2009 at 03:39 PM
don't be a woos - instead, grab up a decent siz'd demo bar & yank 'em out :D then ask how to
fix the craters :) i like a dremel instead !
Posted in thread: Concrete stain/sealer removal??? on 09-09-2009 at 03:36 PM
so much for the stuff you buy in apron stores :mad: i'd rather think you fail'd to neutralize
the acid-stain metallic salts & remove them sufficiently for the sealer to adhere because both
the stain A...
Posted in thread: Converting/saving an old barn? on 08-21-2009 at 07:26 AM
i would but i like post & beam,,, it would even be reasonable to create permanent living
quarters - PERIOD !
Posted in thread: patio--exposed aggregate concrete on 08-21-2009 at 07:21 AM
craig's list is full of those guys & some even know what they're doing :) unfortunately most
buyers posting for work on cl either think they're gc's or too much of themselves :rofl: we
won't work for ...
Posted in thread: remove and re-use stone veneer on 08-21-2009 at 07:16 AM
1, probably not; 2, probably; 3, probably not; 4, chipping gun w/brick chisel &/or grinder &
turbo diamond segmented cup wheel; & 5, probably not,,, sounds like conc & not stone,,, you
might consider ...