VIEW MY

yjyankee

Gift Premium Subscription To yjyankee

Join Date:

09-03-2013

Last Activity:

09-14-2013 7:43 AM

Likes Given: 3

1 Likes on 1 Posts 

LATEST ACTIVITY

  • Posted in thread: Routing Grill hood vent through ceiling on 09-14-2013 at 06:43 AM
    Thanks! I'll look for one. I'm back at work, so the progress has stopped. The good news though;
    we had a nice storm roll through last night and the attic stayed dry! No wet spots around the
    pipe eithe...

  • Posted in thread: Routing Grill hood vent through ceiling on 09-10-2013 at 07:57 AM
    Thanks again for the response. I just spoke w/ a local builder here in my subdv about this, &
    he said being an outside vent, I just need to cut the hole a little bigger, like you said, but
    I don't nee...

  • Posted in thread: Routing Grill hood vent through ceiling on 09-09-2013 at 07:58 PM
    Wow, ask and you shall receive!! Thanks Nealtw!!I guess I should've been more specific. Here's
    the progress thus far... be covering the entire hood with cypress planks. Therefore, I'm not
    really too ...

  • Posted in thread: Routing Grill hood vent through ceiling on 09-09-2013 at 01:50 PM
    Good day-I wasn't sure exactly what section to put this under, so I'm throwing it up here..I'm
    building a hood to go above my outdoor grill. As you can see from the picture attached, it's
    mounted to a...

  • Posted in thread: securing pt 2x4's to a brick wall on 09-03-2013 at 07:59 PM
    Oh, the bottom, or inside of the hood will have a stainless liner around it. Also, I'll be
    venting this straight up, through the roof.

  • Posted in thread: securing pt 2x4's to a brick wall on 09-03-2013 at 07:57 PM
    As luck would have it, I ran into the guy that did my cabinets inside the house. I never even
    thought of this guy for this project. He's going to give me an estimate. Initially, I asked for
    his opinio...

  • Posted in thread: securing pt 2x4's to a brick wall on 09-03-2013 at 10:02 AM
    OK, here's an old picture. The hood will be about 32" above the grill, and just a simple box
    type frame.

  • Posted in thread: securing pt 2x4's to a brick wall on 09-03-2013 at 07:57 AM
    Good morning-I'm planning on building a vent hood above my outdoor grill. The wall behind the
    grill is brick. I'm assuming I use pressure treated 2x4's for the framing. I have cypress for
    the outer sh...

0 COMMENTS
POST A COMMENT