Installation of New Cloplay garage Doors and Framing

Installation of New Cloplay garage Doors and Framing - Psubaron - imag1581-69.jpg
Installation of New Cloplay garage Doors and Framing - Psubaron - imag1633-70.jpgInstallation of New Cloplay garage Doors and Framing - Psubaron - imag1664-71.jpgInstallation of New Cloplay garage Doors and Framing - Psubaron - imag1685-72.jpg
Member Since:
September 10, 2012
Junior Member

INFORMATION

Removed the old barn style garage doors, removed rotting framing, installed new pressure treated framing and cemented post holder into ground for center post. Then installed two new doors and PVC trim around the framing.
Tags
Uncheck a tag to remove it from this entry. Tags in bold were added by you.

Add Tags (Separate tags using a comma.)
Tags will be visible to all users.
Tags for this thread:
3 COMMENTS
Posted: 
September 24, 2012  •  12:23 PM
Your garage looks great & It's to be admired for anyone who can complete a DIY project! Any suggestions on how I can temporarily seal around my garage doors for my winter projects? Temps decrease to 15 degrees or below during
the worst of winter. Eventually I hope to have a separate workshop.
Thanks for any feedback.
 
Posted: 
September 24, 2012  •  12:41 PM
Thanks for your compliment.

Yes, use silicone (white or clear) around all window and gaps in molding to prevent air seepage. Also use spray foam to fill any spaces in the wall that are open to wind. Finally, there are videos on
YouTube etc on how to insulate your garage doors to keep the cold and/or hot air out.
 
Posted: 
November 18, 2012  •  10:16 PM
Most of time garage use to park our car. Can you give me ideas to lessen the trash of my garage?

http://www.dallas-garagedoors.net/
 
POST A COMMENT