DIY Home Repair Forum: Electrical and Wiring
09-03-2012, 05:01 PM
|
|
Replies: 1
Views: 178
Sometimes you can pry the plastic grommet out...
Sometimes you can pry the plastic grommet out with needle nose pliers or using a screwdriver. There is sometimes a spot where you can pry the grommet open or out. The aluminum piece is probably a...
|
|
DIY Home Repair Forum: Electrical and Wiring
08-29-2012, 10:48 PM
|
|
Replies: 8
Views: 369
Could be a loose neutral somewhere and if the...
Could be a loose neutral somewhere and if the light bulb is still in essentially hot and neutral are connected through the light. what I would do is disconnect all wires in both boxes and light...
|
|
DIY Home Repair Forum: Electrical and Wiring
08-29-2012, 10:27 PM
|
|
Replies: 5
Views: 534
There should only be one neutral per hole and...
There should only be one neutral per hole and with the grounds you can put two as long as they are the same gauge wire. Also you should not pigtail these wires. You are not supposed to have junctions...
|
|
DIY Home Repair Forum: Electrical and Wiring
08-29-2012, 10:11 PM
|
|
Replies: 6
Views: 309
Petey is correct , pool equipment needs an...
Petey is correct , pool equipment needs an isolated and insulated ground. Also when you hook these up to the new sub panel at pool you want to make sure that your ground and neutral runs are not...
|
