DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Roofing and Siding > new flashing at roof-wall junction

Help Support House Repair Talk by donating using the link above.
Thread Tools Search this Thread
Old 01-25-2014, 09:28 AM  
Join Date: Dec 2011
Location: West Palm Beach, South Florida
Posts: 19
Liked 1 Times on 1 Posts

Default new flashing at roof-wall junction

How do roofers replace flashing when installing new shingles at a wall-roof junction when the siding is up already? This is not lap siding - it's T1-11 sheets.

suobs is offline  
Reply With Quote
Old 01-25-2014, 04:18 PM  
Fixer Upper
bud16415's Avatar
Join Date: Feb 2013
Location: Erie Pa, Pa
Posts: 4,595
Liked 1579 Times on 1206 Posts
Likes Given: 844


Only way I know is take your saw and cut the siding straight up the roof line the width of a treated board. Remove that siding and slip a Z bend drip
Edge up under the siding that will cap the treated board. Do your shingles and step flashing as normal. Stain or paint the treated board and slip it under the Z and attach to the studs.
bud16415 is online now  
People Like This 
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
wiring a wall oven to 3 wire junction helpwithhomeimprovement Electrical and Wiring 8 02-14-2017 04:07 PM
L flashing used on new roof ok? willingtolearn Roofing and Siding 38 12-13-2011 07:00 PM
roof flashing raymike Introductions 1 09-09-2009 05:06 AM
Step flashing for a leak free roof ! Square Eye Roofing and Siding 1 01-19-2006 09:26 AM

Newest Threads