Pocket Door

Advertise with us
Shop deals on ebay
shop deals on amazon
House Repair Talk

Help Support House Repair Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
C

clemkonan

Member
Joined
Sep 5, 2006
Messages
16
Reaction score
0
I need to create a neat entrance from my basement laundry room to the adjacent furnace room so that I can service my furnace periodically. There is a furnace door or opening but it is clocked off by the water heater.

How do I frame and install a 24 inch pocket door ?

Thanks
 
You can buy pocket door frames at Home Depot for $25. I think the frame acts as the 2x4 studs that would be there if the frame weren't. Install the track and door before the studs are covered.
 
I will come over and check that out but here in Toronto that sucker is $199 and the door about $85
 
Hello ClemKonan:
I would forget the pocket door and go with moving the water heater. It would be sooooo much cheaper and easier.
Glenn
 
Hardware from sliding closet doors, 1x4's for studs======bingo pocket door. Just get a picture of framing and copy.
 
You must log in or register to reply here.

Latest posts

Back
Top