adjusting water in an old case 50 toilet

Advertise with us
Shop deals on ebay
shop deals on amazon
House Repair Talk

Help Support House Repair Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
D

dodgers

New Member
Joined
Mar 12, 2009
Messages
3
Reaction score
0
I have an old case 50 toilet. I have replaced the ballcock etc. Does anyone know how to adjust the water inside the tank. There are two different adjustments. Water inlet and past the ballcock is a regulator. This model has been discontined 40 years ago. Thanks for any help. :)
 
Most ballcock type tanks have two adjusting screws at the water inlet part of the ball rod. The screw on the left is to adjust the height of the ball, to keep it from hitting the lid. The one on the right is to adjust the water height in the tank. This should be 3/4" below the overflow. I would have gotten rid of the ball and replaced the inlet with a Fluidmaster 400A fill valve.
 
Thanks for the response. The problem with installing a fluidmaster is that on this type of toilet it is impossible. It has a built in cavity for the water inlet.
 
Guess you will just be adjusting then. Good luck and hope it works for you.
 
You must log in or register to reply here.

Latest posts

Back
Top