Amana Ice Maker

Advertise with us
shop deals on amazon
SpartanEpoxies
House Repair Talk

Help Support House Repair Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
M

Miles1234

New Member
Joined
May 9, 2012
Messages
3
Reaction score
0
My Amana frig is approx 20 years old. The ice maker died about 2 yars ago.
We bought a new ice maker and installed it-waited 24 hours and it did not fill. We checked the inlet valve and found that the side to the ice maker was not working. We replace the inklet valve, waited 24 hours and it still does not fill though the water in the door does work. Any ideas?
 
The model number is SD25NBW
Since last night I have manually filled the ice maker and while the cubes froze, it did not empty. I have taken it ot, unplugged it and reinstalled it.
How do I know if it is going to work?
It was not going thru the motions, just sitting there.
Ex said the original was filled from behind and new was filled from side, he moved the fill to adapt.
Can we make this work?
 
Last edited:
SD25NBW
Click to expand...

I could only get close online...

SD25N-1-A-P60230-82WA SD25N-1-AG-P60230-82WG
SD25N-1-C-P60230-82WC SD25N-1-P60230-82W
SD25N-A-P60230-14WA SD25N-AG-P60230-14WG
SD25N-C-P60230-14WC SD25N-P60230
SD25N-A-P60201-79WA SD25N-AG-P60201-79WG
SD25N-C-P60201-79WC SD25N-P60201-79W
SD25N-1-A-P60230-74WA SD25N-1-AG-P60230-74WG
SD25N-1-C-P60230-74WC SD25N-1-P60230-74W

We bought a new ice maker
Click to expand...

What part# did you get?

Since last night I have manually filled the ice maker and while the cubes froze, it did not empty. I have taken it ot, unplugged it and reinstalled it. It was not going thru the motions, just sitting there.
Click to expand...

Probably best to check for power to the icemaker at the wire harness...normally power is across the black and white ( 110-120 volts AC ), yellow or tan is for the water fill valve and a green ground.

jeff.
 
SQD25NBW bought D7824706Q which is the only icemaker identified for this model
 
D7824706Q
Click to expand...

A module style icemaker, will have test points at the front behind the front cover....can use a volt meter to see if power is acually comming into the icemaker to make it run.

http://www.applianceaid.com/icemaker-modual.html

refim-service-sheet.jpg


jeff.
 
You must log in or register to reply here.

Latest posts

Back
Top