DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Carpentry and Woodworking > Plywood tub for cooling 3 beer kegs




Reply
 
Thread Tools Search this Thread Display Modes
Old 08-08-2013, 05:29 PM  
gorphus
Junior Member
 
Join Date: Jul 2013
Posts: 14
Liked 1 Times on 1 Posts

Default Plywood tub for cooling 3 beer kegs

I'm hosting a party where I'm expecting 175 guests. I'm getting 3 full size kegs (16.5" diameter, 23" tall) that I need to keep cold. Rather than get 3 plastic tubs, I thought I could build one large box out of plywood and/or 2x4's.

Here is my plan:
Dimensions of the box = 20" deep x 24" high x 60" wide

Water level would go up ~20". If I've done my math correctly, there should be about 40 gallons of water in the tub (some of it will be ice). Simple wood screws every 2" on the vertical walls, ~4" on the horizontal. Add some spray foam to the corners to seal it up. Really only has to stay together for 2 days.

Any thoughts? I did some research and people make 200 - 300 gallon aquaria out of plywood, which would have a lot more pressure on the sidewalls than I'm going to get. They usually apply a waterproof epoxy resin to the inner walls for longer term use, but I don't need mine to last that long.

Thanks,

michael



__________________
gorphus is offline  
 
Reply With Quote Quick reply to this message
Old 08-08-2013, 05:34 PM  
oldognewtrick
Moderator
HRT_MODERATOR.png
 
oldognewtrick's Avatar
 
Join Date: Jul 2009
Location: Nashville, TN
Posts: 5,693
Liked 494 Times on 411 Posts
Likes Given: 150

Default

Why not get some plastic and make a liner?



__________________
oldognewtrick is offline  
 
Reply With Quote Quick reply to this message
Old 08-08-2013, 05:52 PM  
gorphus
Junior Member
 
Join Date: Jul 2013
Posts: 14
Liked 1 Times on 1 Posts

Default

Do you mean to add a plastic sheeting liner to the plywood box or to make the whole thing out of plastic?

__________________
gorphus is offline  
 
Reply With Quote Quick reply to this message
Old 08-08-2013, 06:11 PM  
oldognewtrick
Moderator
HRT_MODERATOR.png
 
oldognewtrick's Avatar
 
Join Date: Jul 2009
Location: Nashville, TN
Posts: 5,693
Liked 494 Times on 411 Posts
Likes Given: 150

Default

Quote:
Originally Posted by gorphus
Do you mean to add a plastic sheeting liner to the plywood box or to make the whole thing out of plastic?
Add the liner inside the box.
__________________
oldognewtrick is offline  
 
Reply With Quote Quick reply to this message
Old 08-08-2013, 07:38 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,720
Liked 921 Times on 822 Posts
Likes Given: 1590

Default

This photo is a concrete form but notice how they overlaped the 2x4s for strength, just add a 2x4 frame to the inside bottom to suport the floor. Red tuck tap would likely hold water for a few days if you tape the inside of the corners. Or just a big sheet of 6 mil poly on the inside.

box form.jpg  
__________________

Last edited by nealtw; 08-08-2013 at 07:41 PM.
nealtw is offline  
elbo Likes This 
Reply With Quote Quick reply to this message
Old 08-08-2013, 10:22 PM  
JoeD
Contractor
 
Join Date: Mar 2006
Location: Welland, Ontario
Posts: 985
Liked 108 Times on 88 Posts
Likes Given: 4

Default

I agree with plastic liner. Don't cut it. Just fold it into the corners and staple over the top edge.
Also some bungies or wooden slats over the kegs to hold them down from floating especially as they get emptied.

Maybe throw some heavy blankets over it to help insulate it a bit.

__________________
JoeD is offline  
 
Reply With Quote Quick reply to this message
Old 08-08-2013, 10:26 PM  
mudmixer
Contractor
 
mudmixer's Avatar
 
Join Date: Sep 2006
Posts: 598
Liked 45 Times on 37 Posts
Likes Given: 37

Default

One traditional method is to get a small metal livestock watering container. You may even be able to rent one if you are in the right location. Fill 1/2 way up with ice cubes and a little cold water a few hours before the kegs arrive. The water is important because it chills quickly to about 35F and provides maximum contact for chilling the beer and maintaining the cold temperature while holding. You could always dig a little pit and poly if you want to hoist those critters up. - This is very similar to chilling bottle of beer where when the person with the longest arms gets the coldest beer.

If you have real beer fans, do not let get it too cold.

Dick

__________________
mudmixer is offline  
 
Reply With Quote Quick reply to this message
Old 08-05-2014, 06:06 PM  
mako1
Junior Member
 
mako1's Avatar
 
Join Date: Mar 2014
Location: Central IL
Posts: 58
Liked 14 Times on 13 Posts

Default

Livestock containers work well.Also old bathtubs and old refrigerators and freezers laid down with the doors off.They are insulated too.I used to be young once.



__________________
mako1 is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Should I rock over the plywood drumz Walls and Ceilings 4 05-24-2012 10:23 PM
BC Plywood vs OSB isola96 Flooring 2 01-16-2012 04:17 PM
plywood sides vs. all plywood box kitchen cabinets? Christian Carpentry and Woodworking 8 03-28-2010 10:11 PM
Plywood walls.. That New Guy Walls and Ceilings 8 11-20-2008 10:05 PM
in wall automated beer dispenser Aceinstaller Electrical and Wiring 5 04-15-2006 11:07 PM

Newest Threads

LATEST SPONSOR DEALS