DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Painting Forum > Hollow core door and bi-fold closet doors that need to be stripped and repainted.

Help Support House Repair Talk by donating using the link above.
Thread Tools Search this Thread
Old 02-06-2012, 03:03 PM  
Junior Member
d_Isigny's Avatar
Join Date: Apr 2011
Location: Phoenix, Arizona
Posts: 5
Default Hollow core door and bi-fold closet doors that need to be stripped and repainted.

First and foremost - thank you to those who post and reply to these threads. I feel more confident to try projects that we would put off or pay someone else to do. Your expertise is much appreciated.

Funny story. Am sure a few of you will be laughing and pointing at my stupidity by the end of this post. goes. we finally finished painting the bedroom for our youngest. The walls look great and we matched the trim color to the trim for the rest of the house. It looks really nice and our youngest is starting to take more pride in her room. I wanted to freshen up the bi-fold closet and the inside part of the door. The outside part of the entry door was professionally painted when we did some renovation a year ago.

The garage walls and floor were masked in plastic. Stop laughing - I was successful in making a poor mans paint booth. I pulled the doors. Then, screwed a long paint stir stick to hose washer then to the very top of each door (I got this tip from U Tube...allowing mobility without marking up the painted side). Applying a low-sheen interior latex with a small Graco sprayer. Using a low pressure setting, 10 to 12 inches away in a swift parallel motion, overlapping as I've done with other vertical items (wood gables) in the past. When I first stepped back...thought I hit a home run. I even prepared an 'adult beverage' to celebrate. Well...was I embarrassed. Returning a little later, maybe 30 minutes, long streaks of drip marks are on each door. I tried to 'minimalize the damage' by using a smooth roller to no avail. The

Need to start over. However, will first need to strip the paint. Stripping paint is new to me. I can use some counsel on what product to strip the doors and suggestions/recommendations on use.

Then, I'll spray the doors - parallel to the ground this time.

If you can offer me input on where I screwed up...and suggestions on fix - I'd be grateful. As well as, brand/type of stripping product to get. Again, thank you for posting on these discussion boards - I'm learning a lot. K

Take good care of you and yours, K
d_Isigny is offline  
Reply With Quote
Old 02-06-2012, 03:36 PM  
Contractor retired
nealtw's Avatar
Join Date: Nov 2010
Location: Upper Fraser Valley, British Columbia
Posts: 23,718
Liked 3054 Times on 2673 Posts
Likes Given: 5050


I would smooth them out with sand paper. You just tried to put on to much on one coat.
nealtw is offline  
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Bi-fold doors in laundry room? alfonsocp Windows and Doors 3 06-05-2017 10:34 AM
Masonite Textured 6-Panel Hollow Core Interior Door ToeJoe Windows and Doors 2 01-25-2015 09:37 PM
Single Bi-fold Doors to Regular Doors linda20603 Carpentry and Woodworking 1 01-24-2012 02:43 PM
Converting Bi Fold Doors to French wworker58 Windows and Doors 1 05-31-2010 11:46 AM
bi-fold doors to french doors jbfly03 Windows and Doors 1 07-15-2009 08:37 AM

Newest Threads