Shower liner replacement

SpartanEpoxies
shop deals on amazon
Shop deals on ebay
House Repair Talk

Help Support House Repair Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
mrbrown38

mrbrown38

New Member
Joined
Mar 14, 2012
Messages
3
Reaction score
0
I'm sure it has a proper term, but I'm unsure of what it's called. There is a plastic/rubber piece that sits under the door of my shower door. It is hardened and looks like it's full of mold.

I was wondering what it's called and how I replacement?

Here is a picture of what it looks like:
5PHSI.jpg


I tried ripping out the current lining, but it looked like I was just ripping out the top portion.
 
Thank you very much. Shower Door Sweep, I'll remember that.

Any recommendations on removal? Do I have to take the frame apart somehow?
 
If you can find the right replacement, you might have to take it apart, but if all you can find is something to stick on top than I guess you could just cut it off flush.
 
Back again =). So I think cutting it flesh might be the way to go. I can't figure out how to take the frame apart and feel like if I push any further I'll destroy the frame.

If I cut it off flesh, what are my options at that point?
 
You will have to find something simular that is a peel and stick. You may find it a hardware stores or glass shop.
 
You must log in or register to reply here.

Latest posts

Back
Top