Appliciances dying - something with my electrical system?

SpartanEpoxies
Advertise with us
Shop deals on ebay
House Repair Talk

Help Support House Repair Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
operaflute

operaflute

Member
Joined
Feb 16, 2007
Messages
14
Reaction score
0
Hello forum-
I've just had my 3rd electrical device randomly die on me. The first was a brand new hand held vac (a nice one!) I plugged it in for the first time, started it up, and before it was even completely fired up, it quit, never to start again. A few months later I had a microwave quit unexpectedly - not brand new, but certainly not old. Now my replacement vacuum has done the same thing (it's a year and a half old now, but still, it's not a cheapie.) I'm not positive it was the same outlet each time, but it could be.
I'm beginning to suspect my house is frying my stuff. Any thoughts? Please phrase in a manner a total DIY idiot would understand...
Old house - 1916 or something. Outlets grounded, but wiring up in the attic looks original or sketchy at least.
Thanks!
 
Maybe not the same outlet but, the same circuit?
What is the voltage from hot to ground and hot to neutral?
Have you plugged in an outlet tester to check for wiring issues?
 
Very likely same circuit.
Question No 2 too advanced for me. Huh?
Yes, I've plugged the little outlet tester thingy in there and that indicates OK.
 
Do you have in excess of +/- 10% of 120VAC?

You'll need a volt meter to perform this test.
Place the hot lead on the meter into the right side of the outlet. Then place the other lead on the meter into the left side of the outlet. Take note of the volt reading. Now remove the lead from the left side of the oulet and place that into the bottom ground hole on the outlet. Take not of the volt reading.
 
Hello OperaFlute:
I think its time for a qualified electrician to take a look and give you a contract price to re-wire the whole house. Saving the appliances will pay for the new wiring very quickly.
Glenn
 
Eek! Would surge protectors help in the meantime? Is that what is going on? Were those numbers (118v, 8v) the expected readings?
 
The 118v is normal, but you are in an ungrounded home with knob and tube. The 8v reading is because the ground probably doesn't go anywhere. Put the meter back in the right and left side of that outlet and watch your voltage. Have someone go around the house and plug in something like a hair dryer or space heater. Take note of voltage readings on this plug while you are trying all the others. Then plug into this one also while the meter is still in it. Let us know what you find. And remember you want to hold both probes in same hand when plugging into socket, its safer for you, and keeps electricity from traveling through heart if your meter has bad probes or your fingers slip. Good luck.......
 
Dang it, the btty died in my multimeter, and then I've been on the road, and now I've moved out of state for the summer. Guess I'll have to address this when I get back. Thanks all!
 
You must log in or register to reply here.

Latest posts

Back
Top