Drilling into Epoxy Floor

House Repair Talk

Help Support House Repair Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

VincentVilla

New Member
Joined
May 9, 2015
Messages
3
Reaction score
0
I have a new epoxy floor, which has dried. I now want to install a sliding closet door guide into the floor, by use of three screws. What is the best way to drill into the floor so i can use the screws? Thank you, from Wisconsin.
 
If it is a concrete floor , use a carbide bit to drill the hole, you can then fill the hole with wood and screw into that.
 
Hi Vincent,
Rent or borrow a hammer drill. If you are drilling into epoxy, definitely use a hammer drill or it will take forever. Use a bolt that is removable. Tap-Cons might be tempting as they are easy, but when it comes time to remove that safe they won't collaborate.
 
What safe?
Tap Cons are the fastest easiest way to do it.
I agree hammer drill is the way to go, might take a whole 2 min.
 

Latest posts

Back
Top