Vent Identification

SpartanEpoxies
Shop deals on ebay
Advertise with us
House Repair Talk

Help Support House Repair Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
frodo said:
yeah, you can buy a cheap fart fan that fits in a tight space, but when it is used, sounds like a jet engine

or spend an extra 20 bucks, might have to get creative in the install

but it will be quiet
Click to expand...
Just want to add to this.
All fans sound good on display in the store, but they have no duct on them.
To much resistance in the duct and the fan chops the air that dosn't get out of the way fast enough. So pay attention to duct, 4" insulated as short as possible and as few bends as possible.
And enough space under door to allow air movement.
 
nealtw said:
Just want to add to this.
All fans sound good on display in the store, but they have no duct on them.
To much resistance in the duct and the fan chops the air that dosn't get out of the way fast enough. So pay attention to duct, 4" insulated as short as possible and as few bends as possible.
And enough space under door to allow air movement.
Click to expand...


and lots of frebrezz [ame="https://www.youtube.com/watch?v=7-COxzRtOEU"]https://www.youtube.com/watch?v=7-COxzRtOEU[/ame]
 
So here is what I ended up with for my vent/drains. The cleanout is facing away from this pic, its in the bedroom closet, I will frame in a access panel. have the drain at 18" height, I measure the other two bathrooms in the houst and that was about where they set. ANything obviously wrong? I have it all dry-fitted and will probably glue it next weekend. Thanks again all!@!

John

IMG_1098.jpg
 
You must log in or register to reply here.

Latest posts

Back
Top