DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Electrical and Wiring > Help with Outside Garage Lighting


Reply
 
Thread Tools Search this Thread
Old 06-27-2017, 05:41 AM  
Afrowookie
Member
Join Date: Jan 2017
Posts: 75
Liked 15 Times on 13 Posts

Default

In the pic, if you are talking about the black single wire next to the single white one. If I remember correctly I think it's coax cables for cable or internet. But I will check again when I go home.


Afrowookie is offline  
nealtw Likes This 
Reply With Quote
Old 06-27-2017, 10:21 AM  
nealtw
Contractor retired
 
nealtw's Avatar
Join Date: Nov 2010
Location: Upper Fraser Valley, British Columbia
Posts: 22,752
Liked 2759 Times on 2425 Posts
Likes Given: 4517

Default

Some one was making sure the red wire was not being used. we can see just the end of it on both sides here.
So there is another junction with this wire to the shinny cable that goes to the garage.


Click image for larger version

Name:	afwo 2.jpg
Views:	43
Size:	102.8 KB
ID:	14209  
nealtw is online now  
 
Reply With Quote
Old Yesterday, 07:38 AM  
Afrowookie
Member
Join Date: Jan 2017
Posts: 75
Liked 15 Times on 13 Posts

Default

Hey all I am back again with good news. I finally fixed my problem, well at least found a solution anyways to my goal which was to get exterior garage lights working again and being able to control them from inside my house.

Here is what I did.

I had to open up the wall between the non-working receptacle(where the ext garage lights were wired to) and the next receptacle (working) with a stud in between. Then added romex between those two receps and thus providing power to the non-working one. BAM! I have power to the recep and to the lights.

But now my lights always stay on, so my solution to have control over them inside my house was getting these items and installing them.

SS13A Slimline Switch Decorator White
https://www.x10.com/x10-home-automat...ess/ss13a.html

LM15A Socket Rocket Screw-In Lamp Module
https://www.x10.com/x10-home-automat...les/lm15a.html

TM751 Wireless Transceiver Module
https://www.x10.com/x10-home-automat...ers/tm751.html

So after all this time, I actually haven't fixed the wiring from my house to the garage, and at this point I am not going to be bothered spending any more time or money to fix this issue because my original issue of getting lights working has been solved.

I would like to thank everyone who provided insight, advice and any help at all. I have learned a whole bunch and am now more confident in dealing with electrical around the house.

Lastly, I apologize for the long-*** thread because of my lack of knowledge. I know it was commented on a couple of times.



Last edited by Afrowookie; Yesterday at 07:44 AM.
Afrowookie is offline  
nealtw Likes This 
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Replacing fluorescent lighting with LED lighting help. Avant Electrical and Wiring 43 12-16-2016 10:03 AM
What is the best lighting for these outdoor lighting fixtures cfclay Electrical and Wiring 20 06-14-2016 08:59 AM
Garage ceiling for garage remodel dexterdog Walls and Ceilings 7 03-05-2010 01:34 PM