DIY Home Improvement, Remodeling & Repair Forum > Appliances > General Appliance Discussion > GE drop in stove electronic module replacement




Reply
 
Thread Tools Search this Thread Display Modes
Old 08-09-2014, 12:50 PM  
powerhose
Junior Member
 
Join Date: Dec 2012
Location: orange beach, al, alabama
Posts: 3
Default GE drop in stove electronic module replacement

Need a little help with a GE JDP39ww1ww drop in stove. Need to get into the control panel replace the electronic oven control module. Thought I knew what I was doing, but now I am scratching my head.
Anyone help me?Thx!



__________________
powerhose is offline  
 
Reply With Quote Quick reply to this message
Old 08-09-2014, 01:58 PM  
jeff1
Contractor
 
jeff1's Avatar
 
Join Date: Mar 2006
Posts: 441
Liked 26 Times on 23 Posts
Likes Given: 1

Default

Hi,

This control is starting to come up as NLA


Electronic clock control kit

GE doesn't put manuals online....I couldn't find much for your model#...





Looks like, power off, lift cooktop and then clock/control cover panal in the middle to access the clock/control.

jeff.



__________________

Appliance Repair Aid
http://www.applianceaid.com/

jeff1 is offline  
CallMeVilla Likes This 
Reply With Quote Quick reply to this message
Old 08-09-2014, 03:53 PM  
beachguy005
Senior Member
 
Join Date: Sep 2012
Posts: 235
Liked 77 Times on 67 Posts

Default

Look here, scroll down to the Oven Control Board and you'll find a video link for replacing it.


http://www.appliancepartspros.com/co...dp39ww1ww.html

__________________
beachguy005 is offline  
 
Reply With Quote Quick reply to this message
Old 08-09-2014, 08:06 PM  
CallMeVilla
Contractor
 
CallMeVilla's Avatar
 
Join Date: Feb 2010
Location: San Diego
Posts: 1,296
Liked 403 Times on 314 Posts
Likes Given: 167

Default

Very nice video ... concise, clear, and well done. Now all he needs is a haircut and someone to explain why he needed gloves for the job.

__________________
CallMeVilla is offline  
 
Reply With Quote Quick reply to this message
Old 08-09-2014, 10:58 PM  
jeff1
Contractor
 
jeff1's Avatar
 
Join Date: Mar 2006
Posts: 441
Liked 26 Times on 23 Posts
Likes Given: 1

Default

Quote:
Originally Posted by beachguy005 View Post
Look here, scroll down to the Oven Control Board and you'll find a video link for replacing it.
Wrong kind of range.
The video even uses a Whirlpool range for replacing a GE clock

jeff.
__________________

Appliance Repair Aid
http://www.applianceaid.com/

jeff1 is offline  
 
Reply With Quote Quick reply to this message
Old 08-10-2014, 08:12 AM  
beachguy005
Senior Member
 
Join Date: Sep 2012
Posts: 235
Liked 77 Times on 67 Posts

Default

You're right, it's wrong.

__________________
beachguy005 is offline  
 
Reply With Quote Quick reply to this message
Old 08-10-2014, 11:26 AM  
powerhose
Junior Member
 
Join Date: Dec 2012
Location: orange beach, al, alabama
Posts: 3
Default

Thanks gentlemen for the help. Yes, the video was good, if the part is no longer available then the stove is dead.
Thx!

__________________
powerhose is offline  
 
Reply With Quote Quick reply to this message
Old 08-10-2014, 11:49 PM  
CallMeVilla
Contractor
 
CallMeVilla's Avatar
 
Join Date: Feb 2010
Location: San Diego
Posts: 1,296
Liked 403 Times on 314 Posts
Likes Given: 167

Default

Is this a glass cooktop only or a full stove?

Maybe these guys can help ... http://www.repairclinic.com/RepairHe...ion-JDP39WW1WW

I would simply call them and have a talk about your part ... and the location of the module is either in the back (similar to the video) or under the glass. If it is under the glass, first, turn off the 220v power to the cooktop. The cooktop is easily removed by removing the two long holding screws from underneath then lifting the entire cooktop out of the countertop. The 220v wiring will probably have to be disconnected .... but there may be enough slack to work with the unit. Now, remove the side screws that hold the glass in place and the control knobs. Lift the glass, locate the module, cut it out, splice with ceramic wire nuts, reassemble.

__________________
CallMeVilla is offline  
 
Reply With Quote Quick reply to this message
Old 08-17-2014, 08:05 AM  
jeff1
Contractor
 
jeff1's Avatar
 
Join Date: Mar 2006
Posts: 441
Liked 26 Times on 23 Posts
Likes Given: 1

Default

Quote:
Originally Posted by CallMeVilla View Post
Is this a glass cooktop only or a full stove?
Full stove, but a drop in style.

jeff.
__________________

Appliance Repair Aid
http://www.applianceaid.com/

jeff1 is offline  
 
Reply With Quote Quick reply to this message
Old 08-17-2014, 11:35 AM  
powerhose
Junior Member
 
Join Date: Dec 2012
Location: orange beach, al, alabama
Posts: 3
Default

That is correct,full stove, drops in, no glass. Still trying to get parts, thanks!



__________________
powerhose is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Frigidaire Élite dishwasher (White panels - Electronic control) doesn't drain enough LHUPA General Appliance Discussion 8 04-20-2011 08:15 PM
Replace pilot with electronic ignition gcheris General Home Improvement Discussion 0 03-28-2011 03:55 AM
Gas Furnace, Electronic Ignition, Dust billb HVAC 2 03-24-2011 05:20 AM
Electric Stove Replacement stanigator General Appliance Discussion 3 09-09-2009 11:31 PM
Janitrol HPT18-60, change to electronic programmable? AU_Prospector HVAC 1 02-12-2008 11:58 AM

Newest Threads

LATEST SPONSOR DEALS