wayneled86
New Member
- Joined
- Jan 22, 2009
- Messages
- 3
- Reaction score
- 0
is there a trick to tracing ductwork? some methology other than getting my wife to yell into one end, and me listen at the other?
thanks
thanks
best way to trace duct
- Thread starter wayneled86
- Start date
Help Support House Repair Talk:
glennjanie
Well-Known Member
- Joined
- Mar 1, 2006
- Messages
- 2,990
- Reaction score
- 7
Hello WayneLed:
Another way is to blow smoke through the duct with the vaccum cleaner. Or, if its metal duct, you could run an electrician's fish tape through it.
Glenn
Another way is to blow smoke through the duct with the vaccum cleaner. Or, if its metal duct, you could run an electrician's fish tape through it.
Glenn
Checkout the following article. It's the method I use to trace ducts. I hope you find it helpful.
http://timothymarsh.hubpages.com/hub/Tracing-Your-Homes-Ductwork
http://timothymarsh.hubpages.com/hub/Tracing-Your-Homes-Ductwork
nealtw
Contractor retired
Welcome to the site, as this thread is very old it is likely to late to help.
Interesting stuff until you tell people to use duct tape on ducts, aluminium tape is what you should be using.
frodo
Senior Member
- Joined
- Aug 5, 2008
- Messages
- 3,067
- Reaction score
- 1,204
