DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Tools > Welder questions.




Help Support House Repair Talk by donating using the link above.
Reply
 
Thread Tools Search this Thread
Old 01-10-2018, 02:51 PM  
bud16415
Fixer Upper
HRT_ADMIN.png
 
bud16415's Avatar
Join Date: Feb 2013
Location: Erie Pa, Pa
Posts: 4,461
Liked 1491 Times on 1139 Posts
Likes Given: 801

Default

Thanks guys. I have 4 power settings is all high, low and 1, 2 this thin metal I have been using for practice is about .06 and I’m running it on low/2 and wire speed on 5 from 1-10.

I can defiantly tell when it is welding correctly as it becomes real easy and sounds correct. I find the distance from the tip to the part plays a big role also. Keeping it pretty close is key. Almost too close to see good around the tip. When I start seeing the end of the wire look like a ball I know I’m drifting to far away. When you get it all correct it feels like the wire is spraying on rather than melting. Looking at the back side and the heat affected area kind of also tells me if I’m hot enough. I have tested a few and they are good and strong with the hammer test. I just came in tried a few vertical up passes. That went pretty good. Not ready to try overhead quite yet.

With the cold weather I noticed I get some good condensation inside the hood. Another thing I never thought about.

Giving me a lot of respect for the welders I worked with over the years that make it look pretty simple.


bud16415 is online now  
 
Reply With Quote
Old 01-10-2018, 03:23 PM  
oldognewtrick
HRT_ADMIN.png
 
oldognewtrick's Avatar
Join Date: Jul 2009
Location: Nashville, TN
Posts: 10,719
Liked 1397 Times on 1110 Posts
Likes Given: 406

Default

All it takes is time in the saddle cowboy....




oldognewtrick is online now  
bud16415 Likes This 
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Buying first welder - cheap MIG or high end stick welder luciano70 Tools 2 04-19-2016 10:22 AM
90 amp Flux Wire Welder advice needed havasu General Chit-Chat 20 11-25-2013 05:35 AM
New welder outlet wiring Bubba Ray Electrical and Wiring 13 01-23-2012 06:50 PM
Miller - Millermatic 180 Mig Welder rustywrangler General Chit-Chat 1 11-15-2011 11:15 AM
Recent safety recall on wire feed welder havasu General Chit-Chat 3 07-22-2010 08:01 PM



Newest Threads