Insulating a well house
- Thread starter d15eliz
- Start date
Help Support House Repair Talk:
Wuzzat?
Well-Known Member
- Joined
- Jan 20, 2010
- Messages
- 2,471
- Reaction score
- 176
You may need 10w per sq. ft. to achieve room temperature for an insulated house. 5w per may prevent freezing in an insulated well house.
Using this,
http://www.degreedays.net/
we can get an idea of your winter temps. You also may want to know your Outside Design Temperature which for my area @ 39 N. Lat. is +14F.
And,
http://www.amazon.com/dp/B001OEPXXU/?tag=skimlinks_replacement-20
If you don't want to gamble $100, wire up a few 100w bulbs to a t'stat and see how many it takes to give enough heat.
In a medium size house, the center can be at 45F and the pipes in the walls can be freezing.
It comes down to a lump sum for insulation plus a small electric bill or you paying a larger annuity to the PoCo. If the payback period is less than 10 years, insulate.
Using this,
http://www.degreedays.net/
we can get an idea of your winter temps. You also may want to know your Outside Design Temperature which for my area @ 39 N. Lat. is +14F.
And,
http://www.amazon.com/dp/B001OEPXXU/?tag=skimlinks_replacement-20
If you don't want to gamble $100, wire up a few 100w bulbs to a t'stat and see how many it takes to give enough heat.
In a medium size house, the center can be at 45F and the pipes in the walls can be freezing.
It comes down to a lump sum for insulation plus a small electric bill or you paying a larger annuity to the PoCo. If the payback period is less than 10 years, insulate.
Last edited by a moderator:
nealtw
Contractor retired
Use a heat tape to keep the pump warm and build an insulted cover to set over the gear. If you heat the whole building you have to worry about ice dams and all that.
Wuzzat?
Well-Known Member
- Joined
- Jan 20, 2010
- Messages
- 2,471
- Reaction score
- 176
IMHO, heat tape with a t'stat set at 33F is an excellent idea.
[ame]http://www.google.com/search?client=safari&rls=en&q=%22well+pump+heat+tape%22&ie=UTF-8&oe=UTF-8#hl=en&safe=off&client=safari&tbo=d&rls=en&sclient=psy-ab&q=well+pump+%22heat+tape%22+house+shed+unheated&oq=well+pump+%22heat+tape%22+house+shed+unheated&gs_l=serp.3...17730.26318.0.26761.22.22.0.0.0.1.691.2625.16j4j1j5-1.22.0.les%3B..0.0...1c.1.2.serp.-IrXJpRlm9Q&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.&bvm=bv.42080656,d.dmQ&fp=fe648220422ac56a&biw=1020&bih=764[/ame]
[ame]http://www.google.com/search?client=safari&rls=en&q=%22well+pump+heat+tape%22&ie=UTF-8&oe=UTF-8#hl=en&safe=off&client=safari&tbo=d&rls=en&sclient=psy-ab&q=well+pump+%22heat+tape%22+house+shed+unheated&oq=well+pump+%22heat+tape%22+house+shed+unheated&gs_l=serp.3...17730.26318.0.26761.22.22.0.0.0.1.691.2625.16j4j1j5-1.22.0.les%3B..0.0...1c.1.2.serp.-IrXJpRlm9Q&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.&bvm=bv.42080656,d.dmQ&fp=fe648220422ac56a&biw=1020&bih=764[/ame]
Last edited:
nealtw
Contractor retired
I get lucky once in a while.
:
Speedbump
Water well etc.
- Joined
- Apr 17, 2009
- Messages
- 672
- Reaction score
- 72
What are we going to use when the incandescent light bulb is gone?
I like light bulbs for heat, but when they burn out, then what. I like the heat tape idea too.
I once thawed a pipe along side a cement block wall that had a small crack in an otherwise 72° basement. The slight breeze blowing into that crack hit the pipe and eventually froze it solid. It was 3/4" copper.
Insulate and tighten it up.
Probably the best thing is a small space heater on a thermostat.
I like light bulbs for heat, but when they burn out, then what. I like the heat tape idea too.
I once thawed a pipe along side a cement block wall that had a small crack in an otherwise 72° basement. The slight breeze blowing into that crack hit the pipe and eventually froze it solid. It was 3/4" copper.
Insulate and tighten it up.
Probably the best thing is a small space heater on a thermostat.
GermanWindows
New Member
- Joined
- Feb 26, 2013
- Messages
- 1
- Reaction score
- 0
Heat tape is something i have used quite a few times before, never any trouble with it.
