Condensate problem

SpartanEpoxies
Shop deals on ebay
shop deals on amazon
House Repair Talk

Help Support House Repair Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
B

bnmb3273

New Member
Joined
Jul 17, 2012
Messages
1
Reaction score
0
I have cleaned the drain line from the Aframe drain and still I am getting water into my duct work , just had a new motor put in and I was wondering if the drain pan under the
aframe has a seal that could let this water into my duct work.
 
May be a clogged P-trap on the condensate drip line.
May be a hole in the drip pan under the evaporator coils.
May be the motor is running at too high a speed and blowing the condensate off the evaporator coils and into the ductwork.
 
Another idea: You may have missing insulation on your cooling line. This COLD line will cause condensation and dripping . . . result is water where you do not want it. Inspect the cooling line carefully.

I had a repair like this that did $$$ damage downstairs and mold.
 
moisture on cold uninsulated duct work will condense inside the duct
 
You must log in or register to reply here.

Latest posts

Back
Top