Hi All, first is it true that using Spackle on wood work that is going to be stained/polyurethaned is the best option for a filler(nail holes, etc)? Also when installing a drop ceiling what is a good amount of distance between the floor Joice and the drop ceiling for an easy installation? Would 4" be sufficient? Thanks in advance for any help regarding these questions. I just want to make sure I do it the right way.
Two Woodworking/Remodel Questions?
- Thread starter Scorask
- Start date
Help Support House Repair Talk:
Square Eye
Well-Known Member
- Joined
- Jan 13, 2006
- Messages
- 1,273
- Reaction score
- 13
4" of clearance above the grid is about the bare minimum. You will be lucky if you don't damage some ceiling tiles at that.
Elmer's makes a decent premixed wood filler. It accepts stain AFTER it dries. But it doesn't act exactly like wood. Spackling compounds do not bond as well as the purpose made wood fillers, There is also a wax "crayon" made by Minwax that you can use after staining and before sealing with poly. Just find a color that matches the stain, scrape a dab into the hole and seal. Overall though, the best option is to use a quality wood filler and stain and seal over it.
Elmer's makes a decent premixed wood filler. It accepts stain AFTER it dries. But it doesn't act exactly like wood. Spackling compounds do not bond as well as the purpose made wood fillers, There is also a wax "crayon" made by Minwax that you can use after staining and before sealing with poly. Just find a color that matches the stain, scrape a dab into the hole and seal. Overall though, the best option is to use a quality wood filler and stain and seal over it.
