Additional weight on Truss

SpartanEpoxies
Advertise with us
Shop deals on ebay
House Repair Talk

Help Support House Repair Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
R

reprosser

Infrequent User
Joined
Feb 3, 2010
Messages
20
Reaction score
0
I have a shop and tractor shed that are pole buildings with Truss roof.

I want to know how much weight I can safely hang from the bottom (joist?) of the truss. I don't want to pull an engine block, but may have needs to hang things from time to time.

I have the spec for my Truss, but I don't know how to read it.

BCDL (botom chord dead load) is listed at 5.0 psf. I hope that does not mean I can only hang 5 lbs, because I think the lights weigh that much.:p

There is other data on the spec, so let me know if I can provide more info.
 
reprosser said:
I have a shop and tractor shed that are pole buildings with Truss roof.

I want to know how much weight I can safely hang from the bottom (joist?) of the truss. I don't want to pull an engine block, but may have needs to hang things from time to time.

I have the spec for my Truss, but I don't know how to read it.

BCDL (botom chord dead load) is listed at 5.0 psf. I hope that does not mean I can only hang 5 lbs, because I think the lights weigh that much.:p

There is other data on the spec, so let me know if I can provide more info.
Click to expand...

5 PSF is a distributed load, you want to load it with a concentrated load.

You need to post the Area Moment of Inertia, I, in inches⁴, and
the modulus, E, in PSI.

Also, how far apart are the trusses and what distance do they span?
 
Last edited:
Ill just posts the data sheet.
Truss.jpg
 
From note 4, the bottom chord supports a 10 psf live load.

If no math mistakes and no incorrect assumptions,
for a 30' span and assuming 2' spacing, 2x30 = 60 sf.
10 psf with 60 sf = 600# distributed over 30'.

It's 20# per foot of span, so you could hang 30 ea. 20# weights.

For a single concentrated load in midspan, I'd ask the manuf. And ask him about the 30 ea. 20# weights; solving a textbook problem is one thing but this is the real world.

If it were a single piece of wood I could probably figure it.
 
Last edited:
These trusses are used in my tractor shed. 5 trusses spaced 12 feet apart.

TractorShedDone.jpg
 
reprosser said:
These trusses are used in my tractor shed. 5 trusses spaced 12 feet apart.

TractorShedDone.jpg
Click to expand...
And the span doesn't look like 30', either. I'd ask the manuf.
or put up your own joist designed to carry whatever max. concentrated load you want for it. The calc. for this second option should be easy.
 
You must log in or register to reply here.

Latest posts

Back
Top