DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > HVAC > oil Burner pump

Help Support House Repair Talk by donating using the link above.
Thread Tools Search this Thread
Old 01-27-2009, 06:00 PM  
Junior Member
Join Date: Apr 2008
Posts: 2
Default oil Burner pump

I have an old GM Delco Heat furnace and burner. Recently I have had an episode or two where I needed to reset the unit to get it to run(Old style Honeywell control). I cleand the burner/changed the nozzle etc. and the unit is running very well. However the pump is cracked and leaking around a pipe plug(appears to be an alternate fuel inlet). My question is whether or not I'll be able to get a replacement pump for a burner this old, and if so where(in general) to get one. The pump has two lower case "h"s with a diamond between them if thats any help. I always thought the pumps were pretty standard but I'm really not sure. I know I should really consider replacing the whole furnace/burner due to its age and lack of effeciency, but as always cost is a concern. Not to mention it very seldom runs due to me heating primarily with wood.

saselker is offline  
Reply With Quote
Old 02-06-2009, 09:52 PM  
Senior Member
Join Date: Mar 2006
Posts: 2,990
Liked 4 Times on 4 Posts


Welcome Saselker:
Yes, new oil pumps are available for most units.
You might try Grainger, Johnstone, United Refrigeration or a local oil heater repair specialist.
glennjanie is offline  
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Basement water leak due to a submersible sump pump failing in a water well stanigator Plumbing Forum 1 05-18-2009 05:27 PM
Electric Heat Pump & Programmable Thermostat John Greeb HVAC 2 01-09-2009 10:01 PM
Heat pump not hitting target temp pens66 HVAC 5 07-17-2008 11:29 AM
Sump Pump Question cibula11 Plumbing Forum 3 04-27-2007 05:41 AM
york split system heat pump brian HVAC 1 07-31-2006 11:48 PM