Best or good Weather Stripping for exterior doors

shop deals on amazon
Advertise with us
Shop deals on ebay
SpartanEpoxies
House Repair Talk

Help Support House Repair Talk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
S

shane2943

Member
Joined
Oct 31, 2010
Messages
19
Reaction score
0
Hi everyone!

Looking for some weather stripping ideas for all of my exterior doors. Two of the doors do not have any weather stripping at all and one of them has it, but it's in sad shape.

Looking for something reliable that will also reduce the 'impact' of the door as it shuts, if that makes any sense.

Want weather stripping for the sides, top and bottom of the doors where they glide over the thresholds.

The 'peal-n-stick' stuff looks far too cheap to me.

Thanks in advance!!! :banana:
 
Do your doors not have a slot cut in the jam for the push in seals. For the bottom get the kind that are aluminium with a rubber seal that you screw down to the threshold
I don't know of a better looking seal for the rest. good luck
 
shane2943 said:
Hi everyone!

Looking for some weather stripping ideas for all of my exterior doors. Two of the doors do not have any weather stripping at all and one of them has it, but it's in sad shape.

Looking for something reliable that will also reduce the 'impact' of the door as it shuts, if that makes any sense.

Want weather stripping for the sides, top and bottom of the doors where they glide over the thresholds.

The 'peal-n-stick' stuff looks far too cheap to me.

Thanks in advance!!! :banana:
Click to expand...

Hello Shane2943,

Here is what nealtw was talking about, you can buy the compression weatherstripping at any hardware or big box store, and it can be found in colors, bronze, beige, or white.

~Tangelo
Weatherstripcompressionartcolorcopy.jpg
 
Hi there,
In most modern homes we use the weatherstripping described by nealtw
and tangelo. It requires that the door jambs are prepared in advance to
accept the kerf style weatherstripping.
I am thinking that your house is a little older and would require the
stripping that we used before kerf style q-lon watherstripping was created.
This product consists of aluminum strips with a bulb attached to the edge
that you screw to the door stop area of the jamb and press gently against
the door in the closed position.
Here is a picture of the product and some of the available finishes:
WSTip_clip_image001.jpg


The important thing to know is that this type of weatherstripping comes
standard with a vinyl bulb installed. The vinyl bulb will stick to latex paint
and peel it off the door even if paint is dry . You will need to special order the
product from the Pemko company or Columbia Aluminum Products and
specifiy that you want the silicone bulb installed. The silicone bulb does not stick to latex paint.

The part numbers are:
Pemko 303, 316 or 297 with the S (for silicone) after the finish letters.
Columbia 334 or 320 with the S after the finish letters.
You can order from a quality hardware store but probably not from
a big box store.

I have used the Columbia product for years on existing installations with
great success...Seals nicely and does not stick to paint. It will also soften
the impact of the door slamming that concerned you.

For the bottom of the door we usually use a door shoe. It fits like a sleeve
on the bottom of the door and has a vinyl seal that brushes on the threshold
to create the seal. You may have to cut the door bottom to allow the
1/2" necessary for the door shoe to fit. If you do this be sure to seal the
bottom of the door before you reinstall to protect against moisture.

I hope that helps!
Richard The Door Guy
thedoorguy.com
 
Last edited:
Sorry I haven't responded, guys. Thank y'all for the replies!

The door jam is not slotted for the newer style weather stripping.

TheDoorGuy said:
Hi there,
In most modern homes we use the weatherstripping described by nealtw
and tangelo. It requires that the door jambs are prepared in advance to
accept the kerf style weatherstripping.
I am thinking that your house is a little older and would require the
stripping that we used before kerf style q-lon watherstripping was created.
This product consists of aluminum strips with a bulb attached to the edge
that you screw to the door stop area of the jamb and press gently against
the door in the closed position.
Here is a picture of the product and some of the available finishes:
WSTip_clip_image001.jpg


The important thing to know is that this type of weatherstripping comes
standard with a vinyl bulb installed. The vinyl bulb will stick to latex paint
and peel it off the door even if paint is dry . You will need to special order the
product from the Pemko company or Columbia Aluminum Products and
specifiy that you want the silicone bulb installed. The silicone bulb does not stick to latex paint.

The part numbers are:
Pemko 303, 316 or 297 with the S (for silicone) after the finish letters.
Columbia 334 or 320 with the S after the finish letters.
You can order from a quality hardware store but probably not from
a big box store.

I have used the Columbia product for years on existing installations with
great success...Seals nicely and does not stick to paint. It will also soften
the impact of the door slamming that concerned you.

For the bottom of the door we usually use a door shoe. It fits like a sleeve
on the bottom of the door and has a vinyl seal that brushes on the threshold
to create the seal. You may have to cut the door bottom to allow the
1/2" necessary for the door shoe to fit. If you do this be sure to seal the
bottom of the door before you reinstall to protect against moisture.

I hope that helps!
Richard The Door Guy
thedoorguy.com
Click to expand...

I actually ended up using exactly what you recommended about a week ago....just the vinyl bulb instead of silicone. Sure enough, the paint on the front door is peeling off. Not a big deal since the door itself needs to be replaced as well as the jam. This is just a temporary solution.

Thanks!
 
Thanks for the update...Glad it worked out.
When you replace door and jamb just make sure
it has the kerf style weatherstripping....It's really
great stuff! Comes standard on most all of the prehung
units these days.

When buying new door unit be sure to check out fiberglass doors..
I am an old wood guy but you cannot beat these fiberglass doors for
holding up.

Check out my article on why choose a fiberglass door .

TheDoorGuy
 
You must log in or register to reply here.

Latest posts

Back
Top