DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Windows and Doors > Fiberglass Pre-hung entry door install - gone wrong or am I anal retentive




Reply
 
Thread Tools Search this Thread Display Modes
Old 08-07-2014, 10:30 AM  
harbinger
Junior Member
 
Join Date: Aug 2014
Posts: 2
Liked 1 Times on 1 Posts

Default Fiberglass Pre-hung entry door install - gone wrong or am I anal retentive

Hey everyone, first post - registered to ask a question to the community.

I recently purchased a fiberglass pre-hung exterior door to replace the dented steel one that came with our house.

The first install was a disaster - hung off-level/plumb, about 1/2" above the frame/sub-sill - so we had a second contractor come out and redo the install.

Well, the second contractor shimmed the door on the bottom as well as the side/tops, about 1/4-1/3" higher than the old steel door was.

I've attached some images - first image is the original gap, second is the first (botched) install, third is the newest install. Any insights from the experts would be appreciated.



old_door_gap.jpg   first_install_gap.jpg   second_install_gap.jpg  
__________________
harbinger is offline  
zannej Likes This 
Reply With Quote Quick reply to this message
Old 08-07-2014, 12:54 PM  
beachguy005
Senior Member
 
Join Date: Sep 2012
Posts: 229
Liked 77 Times on 67 Posts

Default

Yeah....you're being anal.



__________________
beachguy005 is offline  
 
Reply With Quote Quick reply to this message
Old 08-07-2014, 01:23 PM  
kok328
Supporting Member
HRT_SUPPORTER.png
 
Join Date: Nov 2007
Location: Grand Blanc, MI
Posts: 2,212
Liked 115 Times on 100 Posts
Likes Given: 65

Default

A little caulk, paint and lipstick and your good to go.

__________________
kok328 is offline  
 
Reply With Quote Quick reply to this message
Old 08-07-2014, 01:27 PM  
harbinger
Junior Member
 
Join Date: Aug 2014
Posts: 2
Liked 1 Times on 1 Posts

Default

Thanks guys. I'll get some non-expanding foam and finish 'er off. Glad to know that shims under the entry door *aren't* a no-no as I was told.

__________________
harbinger is offline  
 
Reply With Quote Quick reply to this message
Old 08-07-2014, 07:01 PM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,704
Liked 921 Times on 822 Posts
Likes Given: 1585

Default

The problem isn't the door or the install, the floor is supposed to be level. Then the qustion is what has happened and can it it be fixed. Without doing anything to the floor the sill would still like to be solid when you step on it. The shims should be the full width of the door. From nothing to what ever to make the area level.

__________________
nealtw is online now  
2
People Like This 
Reply With Quote Quick reply to this message
Old 08-17-2014, 12:59 AM  
zannej
Senior Member
 
zannej's Avatar
 
Join Date: Jun 2014
Posts: 211
Liked 27 Times on 19 Posts
Likes Given: 455

Default

I couldn't help but notice the cat paw in the first picture. I love cats. LOL.

One question-- how stable is the metal threshold thing? Does it wobble at all or is it solid? If its solid then I would say its probably fine.
Just need some light sanding to get rid of old paint and smooth it out (check it for lead first), some caulk, and then new paint.

__________________
zannej is offline  
 
Reply With Quote Quick reply to this message
Old 08-17-2014, 06:22 PM  
daltonbrain
Junior Member
 
Join Date: May 2014
Posts: 7
Liked 4 Times on 3 Posts
Likes Given: 1

Default

The shims under the threshold are required when the floor is not level. As others have stated, as long as the threshold is solid you will be fine. Some caulk to prevent insects from entering, a piece of trim to cover the gap and a little paint and it will look great.

Mike



__________________

www.dverter.com
Prevent and stop leaks in horizontal vinyl siding caused by j-channels used around windows, doors, and other wall openings.

daltonbrain is offline  
zannej Likes This 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Newly Hung door sagging Msupsic Windows and Doors 5 11-30-2010 12:00 PM
Stain Fiberglass Entry Doors Gryphon Windows and Doors 2 08-23-2010 10:37 AM
Replacement Steel/Fiberglass Rear Entry Combination Door Collvan Windows and Doors 2 08-31-2009 09:24 PM
Painting fiberglass entry doors mozingod Windows and Doors 2 11-14-2008 06:18 PM
Need a 2-4 Entry Door dekohl Windows and Doors 3 04-08-2008 09:17 AM

Newest Threads

LATEST SPONSOR DEALS