DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Decks & Patios > Restore/salvage Deck

Help Support House Repair Talk by donating using the link above.
Thread Tools Search this Thread
Old 04-17-2017, 11:09 AM  
Junior Member
Join Date: Apr 2017
Posts: 7
Likes Given: 4

Default Restore/salvage Deck

Hello. We just bought a home built in '86. Has front and back decks. Looks like has been stained with oil based stain to match outside (have can of stain in garage)
Wood appears to be very weathered. Boards are solid underfoot, no feel of weak joists. We would like to salvage for at least a couple of years before we save for likely composite/pvc or similar.

What are people's thoughts on Deck Restore versus Deck over (Rust O, Behr)?

With the look of this I was thinking I would need to strip, power wash, and sand before applying. Some are telling me sanding won't be needed. But I fear that after washing the splinters and grain will be worse.

Would these size cracks need a crack filler as well?

Thumb typed on iPhone

Click image for larger version

Name:	IMG_0471.jpg
Views:	93
Size:	253.1 KB
ID:	13888   Click image for larger version

Name:	IMG_0469.jpg
Views:	97
Size:	152.8 KB
ID:	13889  

Last edited by cgarcia6445; 04-17-2017 at 11:10 AM. Reason: Adding pic
cgarcia6445 is offline  
Reply With Quote
Old 04-17-2017, 12:16 PM  
slownsteady's Avatar
Join Date: Jun 2009
Location: Newton, NJ
Posts: 6,412
Liked 1142 Times on 946 Posts
Likes Given: 1873


A year or so ago, there were reports that the Rustolem product had problems with bonding. I think there's a thread about that somewhere in here. You probably want to check into this problem before purchasing the product.

Learn something every day
slownsteady is online now  
Reply With Quote
Old 04-17-2017, 12:31 PM  
Fixer Upper
bud16415's Avatar
Join Date: Feb 2013
Location: Erie Pa, Pa
Posts: 4,467
Liked 1497 Times on 1144 Posts
Likes Given: 802


Looks like a lot of nails have been added to supplement some screws over the years. Any sanding will require those to be set first. If you are just trying to get a few more years out of it I would just spot sand the places where you are getting splinters and give it a couple good coats of quality deck stain. The first coat is really going to suck right in. The second coat I think you will be surprised at how good it will look. I built a deck out of an old deck I tore down a couple years ago and I flipped them all over and it turned out great. Mine looked worse than yours to start. Forget the restore products IMO.
bud16415 is online now  
Reply With Quote
Old 04-17-2017, 12:43 PM  
Contractor retired
nealtw's Avatar
Join Date: Nov 2010
Location: Upper Fraser Valley, British Columbia
Posts: 23,590
Liked 2997 Times on 2626 Posts
Likes Given: 4936


The cracks between the boards should be cleaned out from time to time as the junk in there will hold water and advance the growth of mold and rot.
nealtw is online now  
Reply With Quote
Old 04-17-2017, 01:19 PM  
Senior Member
Join Date: Jan 2011
Location: Hartfield VA, VA
Posts: 1,984
Liked 262 Times on 206 Posts
Likes Given: 71


Forget any form of filler, just not going to work.
Also I 100 agree to not use any form of coating like Restore.
Everyone I've seen is peeling off.
I would not waste my time and money on those deck boards, I'd wait and replace with new decking.
joecaption is offline  
Reply With Quote
Old 04-17-2017, 01:20 PM  
oldognewtrick's Avatar
Join Date: Jul 2009
Location: Nashville, TN
Posts: 10,721
Liked 1399 Times on 1112 Posts
Likes Given: 406


I used this on a deck last year and it covered really well.
oldognewtrick is online now  
cgarcia6445 Likes This 
Reply With Quote
Old 04-22-2017, 09:15 PM  
Junior Member
Join Date: Aug 2016
Location: Upstate, SC
Posts: 192
Liked 90 Times on 72 Posts
Likes Given: 102


I've used the Behr "Deck-Over" several times to usually good effect though I also had some delaminating where the wood got wet and didn't dry out well because of shading. It's not cheap nor does it go very far but it looks great while it lasts. Prepwork would be to screw down anything which needs that (including places where nails pulled lose), set any loose nails, cut away or glue down any edge splintering, then give the deck a good cleaning. Ideally, I'd seal the wood first then use the Deck-Over when it was fully dried. That should give you best appearance for the few years you want.

A good painting will be equally effective in preserving the deck a few years although it won't hide the cracks and splits like the Deck-Over does. That will be the cheapest option.

IMHO a good composite decking is the way to go if you don't use one of the 'exotic' woods like Ipe'. It lasts at least as long as the framing wood does which is all you can hope for with a deck.


Mastercarpenty is offline  
cgarcia6445 Likes This 
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Trex or Wood with Restore or Deckover soparklion11 Painting Forum 4 09-16-2017 08:19 AM
My latest restore project retrobob General Chit-Chat 33 07-16-2015 07:57 PM
How do I restore damaged unistone? Komodo Bricks, Masonry and Concrete 2 08-14-2014 04:12 AM
Cedar Deck Staining/finishing Questions (new deck) RockyMtnBlue Decks & Patios 7 12-12-2012 02:59 AM
How to restore laminate hardwood floor? Superpack Cleaning 6 10-14-2010 11:30 AM

Newest Threads