DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Carpentry and Woodworking > Looking for a heavy-duty slide-out solution for crawlspace


Reply
 
Thread Tools Search this Thread
Old 07-24-2017, 04:27 AM  
bud16415
Fixer Upper
HRT_ADMIN.png
 
bud16415's Avatar
Join Date: Feb 2013
Location: Erie Pa, Pa
Posts: 4,177
Liked 1369 Times on 1050 Posts
Likes Given: 744

Default

Quote:
Originally Posted by ilyaz View Post
So here's a photo of the top of that 2x4 in the middle. I managed to take it from inside the crawl space so the white strip at the bottom is the opening.

Removing the 2x4 is tempting but my concern is that it supports the staircase. If I remove it, is the staircase going to collapse if someone heavy enough steps on it? How can I reinforce it if I remove the 2x4?
I donít know for a fact. Maybe Neal of some of the framing guys will post in on this. But it looks like there is a triple header on the top now that the stud is connected to.

Wish you lived close by I have the track out of an old garage door out back with the wheels and such that would work good for this project, I would donate to the project.


bud16415 is offline  
 
Reply With Quote
Old 07-24-2017, 06:28 AM  
Snoonyb
Senior Member
Join Date: Sep 2006
Posts: 2,096
Liked 362 Times on 321 Posts
Likes Given: 1

Default

The triple floor joist would carry, however pictures of both ends of that element would help.


__________________
Illigitimas non-carborundum
Snoonyb is offline  
 
Reply With Quote
Old 07-24-2017, 07:07 AM  
Sparky617
Member
Join Date: Nov 2014
Location: Cary (Raleigh), NC
Posts: 610
Liked 192 Times on 156 Posts
Likes Given: 124

Default

Quote:
Originally Posted by ilyaz View Post
So here's a photo of the top of that 2x4 in the middle. I managed to take it from inside the crawl space so the white strip at the bottom is the opening.

Removing the 2x4 is tempting but my concern is that it supports the staircase. If I remove it, is the staircase going to collapse if someone heavy enough steps on it? How can I reinforce it if I remove the 2x4?

It probably won't given the triple 2x heading off the opening at the top. However, that is why both of us recommended putting a header in above the opening. The stairs to my basement have a 2x4 in the middle of the opening as well, but the stairs to the second floor and attic do not have it. I suspect the 2x4 in the middle was there more for the drywall than to carry the load of the stairs.
Sparky617 is offline  
bud16415 Likes This 
Reply With Quote
Old 07-24-2017, 09:47 AM  
nealtw
Contractor retired
 
nealtw's Avatar
Join Date: Nov 2010
Location: Upper Fraser Valley, British Columbia
Posts: 22,883
Liked 2786 Times on 2450 Posts
Likes Given: 4576

Default

Quote:
Originally Posted by bud16415 View Post
I donít know for a fact. Maybe Neal of some of the framing guys will post in on this. But it looks like there is a triple header on the top now that the stud is connected to.

Wish you lived close by I have the track out of an old garage door out back with the wheels and such that would work good for this project, I would donate to the project.
The 2x4 is drywall backing only. will not hurt anything to remove it.
nealtw is offline  
bud16415 Likes This 
Reply With Quote
Old 07-24-2017, 09:51 AM  
nealtw
Contractor retired
 
nealtw's Avatar
Join Date: Nov 2010
Location: Upper Fraser Valley, British Columbia
Posts: 22,883
Liked 2786 Times on 2450 Posts
Likes Given: 4576

Default



nealtw is offline  
 
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
How to paint an exterior plastic kids slide kinchi Painting Forum 11 06-28-2016 05:11 AM
heavy lifter slownsteady General Chit-Chat 2 02-16-2016 10:12 PM
Closet Drawers do not slide easy, how can i fix them? drewdin Carpentry and Woodworking 6 01-21-2014 06:38 PM
sliding glass door is difficult to slide helenad@nycap.rr.com Introductions 2 07-17-2006 04:17 PM



Newest Threads