DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Plumbing Forum > low pressure plumbing parts. outdoor shower?


Reply
 
Thread Tools Search this Thread Display Modes
Old 02-16-2017, 07:35 PM  
Philphine
don't give him tools!!!
Join Date: Feb 2007
Location: louisville, ky.
Posts: 127
Liked 2 Times on 2 Posts

Default low pressure plumbing parts. outdoor shower?

I've been fooling with rain harvesting the last few years and have a few extra containers. I want to play with an outdoor shower next.

I have the container (55gal plastic drum) finishing up the stand to hold it above the shower and about have the fittings to collect the water, but having some trouble with the outlet for the shower to actually work. everything I find is for a pressurized system and all i'll have is gravity.

I got one of those water controls that uses a pull chain and lets water flow as long as you pull the chain (think back to petticoat junction if you're old enough), but it works with 1/2" pipe. likewise the shower heads I'm find are all indoor pieces, where at best I can take that little control washer (not sure what you call it) out, but it's still about 1/2" piping.

does anyone make lower pressure parts? I've been looking but can't find anything, or don't know where to look or what other name they might go by. I think I could drill out an outdoor sprinkler ring for a shower head (that's going to be my first try at it anyway (and use larger garden hose with it, but the control valve I still don't have an idea for beside the small one I have.

thanks if anyone knows or has any ideas.


Philphine is offline  
 
Reply With Quote
Old 02-16-2017, 07:50 PM  
nealtw
Contractor retired
HRT_SUPPORTER.png
 
nealtw's Avatar
Join Date: Nov 2010
Location: Upper Fraser Valley, British Columbia
Posts: 21,531
Liked 2448 Times on 2155 Posts
Likes Given: 4131

Default

Interesting, have you thought about watering can parts.
https://www.amazon.com/Rubber-Univer.../dp/B007906IW8


nealtw is online now  
 
Reply With Quote
Old 02-16-2017, 08:37 PM  
Snoonyb
Established Member
Join Date: Sep 2006
Posts: 1,645
Liked 251 Times on 229 Posts
Likes Given: 1

Default

You have some "inventive" alternatives from plastic tubing, ABS and pvc plumbing parts, which are readily available.
__________________
Illigitimas non-carborundum
Snoonyb is offline  
 
Reply With Quote
Old 02-17-2017, 02:09 AM  
frodo
Senior Member
HRT_SUPPORTER.png
 
frodo's Avatar
Join Date: Aug 2008
Posts: 2,663
Liked 957 Times on 755 Posts
Likes Given: 359

Default

what exactly arre you looking for ?

a bigger sized opening valve, they are called self closing valves

http://www.valvecompany.com/valve-ty...ng-valves.html
__________________
Cogito, ergo armatus sum.

My advice is free, If I have helped you and you wish to help the site out with a gift
use this link
http://www.houserepairtalk.com/forum/...faq=supporting
frodo is offline  
 
Reply With Quote
Old 02-17-2017, 08:06 AM  
joecaption
Established Member
Join Date: Jan 2011
Location: Hartfield VA, VA
Posts: 1,786
Liked 176 Times on 139 Posts
Likes Given: 24

Default

http://www.homedepot.com/p/Homewerks...Q&gclsrc=aw.ds
joecaption is offline  
 
Reply With Quote
Old 02-17-2017, 08:37 AM  
kok328
Established Member
Join Date: Nov 2007
Location: Grand Blanc, MI
Posts: 2,662
Liked 225 Times on 191 Posts
Likes Given: 102

Default

Try something like this:

https://www.grainger.com/product/CON...AS01?$smthumb$
kok328 is offline  
 
Reply With Quote
Old 02-17-2017, 11:02 AM  
Philphine
don't give him tools!!!
Join Date: Feb 2007
Location: louisville, ky.
Posts: 127
Liked 2 Times on 2 Posts

Default

thanks, both of these seem like they could work. I'm think I'm going to try the sprinkler piece I have since I already have it, but the watering can head may be my next try if it doesn't work out. the home depot piece is what I have now, that I'm thinking won't flow enough just by gravity.

I really like the grainger piece, but the price is pretty high. it does make me think of bigger ball valves I've seen at work, but they seemed too stiff to work easily. that long arm on it would give it leverage though. I hadn't thought of that.

thanks for giving me a few more options to think about.


Philphine is offline  
 
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Parts for 2-Way Shower 00naomi00 Plumbing Forum 17 02-13-2017 10:53 PM
Help with parts needed for 2 way shower swindmill Plumbing Forum 26 10-26-2011 01:19 PM
Help please - identifying shower door parts for repair pippa Plumbing Forum 9 12-09-2010 09:07 AM
Outdoor plumbing/pipe question Chickensaur Plumbing Forum 5 03-23-2009 06:58 PM
Replacing shower parts? WestBentley Plumbing Forum 2 03-09-2007 01:12 PM