DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > General Home Improvement Discussion > How to end subway tile at window without using bullnose




Reply
 
Thread Tools Search this Thread Display Modes
Old 06-04-2011, 09:03 AM  
DebbieG
Resourceful Designer
Join Date: Jul 2007
Location: Southgate, MI
Posts: 50
Default How to end subway tile at window without using bullnose

Hi all,

I'm remodeling a kitchen and will be installing a subway tile backsplash and would love some opinions. There is a window above the sink that I need to tile around. Since this is being done on a tight budget and we already splurged on a granite countertop, I need to keep this cheap and want to use the tile I found at Lowes for under $3 a sq ft made by American Olean...problem is that they do not make a tile with a finished edge on the 3" side or the 6" side. (At least not in the same shade of white that they made exclusively for Lowes)..I am going for a clean, contemporary look and do not really want to frame out windows in casing or frame it out with the bullnose tile that they do have....I just want to end the tile at the window.
There is some kind of plastic strip that they have that can be used but I would really like to see how that would look around a window if anyone has used it. My other thought was to just paint the unfinished edge but it has little nubs for self spacing that would have to be sanded down first and I'm just not so sure that would look good in such a conspicuous area as a window.
Please help! Anyone else try these things or another solution? If so, please post photos ...close ups would be especially helpful! Thanks!


Moms cabinets 5 - 2011 006.jpg   Moms cabinets 5 - 2011 008.jpg  
__________________
Debbies Resourceful Designs[FONT="Comic Sans MS"][/FONT]
DebbieG is offline  
 
Reply With Quote
Old 06-04-2011, 04:49 PM  
oldognewtrick
Lost And Found Dept
HRT_ADMIN.png
 
oldognewtrick's Avatar
Join Date: Jul 2009
Location: Nashville, TN
Posts: 7,457
Liked 755 Times on 619 Posts
Likes Given: 236

Default

Debbie, what about a small 1/4 round to frame the window with and hide your cut edge?


oldognewtrick is offline  
 
Reply With Quote
Old 06-07-2011, 06:09 AM  
DebbieG
Resourceful Designer
Join Date: Jul 2007
Location: Southgate, MI
Posts: 50
Default

Thanks but don't really want to frame out window with anything if I can help it. I'd probably use the plastic strip (Shulter system I believe it's called) before trimming out the window but would just like to see photos from someone who has used it first.
__________________
Debbies Resourceful Designs[FONT="Comic Sans MS"][/FONT]
DebbieG is offline  
 
Reply With Quote
Old 11-27-2011, 12:36 PM  
marvelousmelv
Junior Member
Join Date: Nov 2011
Posts: 1
Default Forum Post

Hello, I'm in the exact same situation as you. Did you ever decide? If so, could you post pictures?
marvelousmelv is offline  
 
Reply With Quote
Old 11-27-2011, 02:19 PM  
joecaption
Senior Member
Join Date: Jan 2011
Location: Hartfield VA, VA
Posts: 1,540
Liked 96 Times on 78 Posts
Likes Given: 2

Default

Want to or not casing is your best bet and will also bridge the air gap that's going to be around the window and cover up that outside corner bead you put on for some reason.
Do you plan on tiling the whole wall and over the top of the window? If not how are you going to trim that out?
What's the reason for not wanting casing?


joecaption is offline  
 
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Do I need to grout antique subway fireplace tiles? xiard Bricks, Masonry and Concrete 1 04-17-2009 10:57 AM
Using stucco bullnose trowel? TaskBoy Bricks, Masonry and Concrete 0 01-05-2009 11:29 PM
tile to glass block window transition derekm Flooring 3 06-24-2008 09:58 PM
Subway Tile Grout cibula11 Flooring 1 04-21-2008 12:34 PM
Bullnose Archway help needed NogaroS4 Decorating and Design 7 04-15-2008 10:45 AM

Newest Threads

LATEST SPONSOR DEALS