Originally Posted by TheDoorGuy
...Qlon kerf weatherstrip does come in different thickess
or reach configuration. You could use the thinner one by the latch area
and then cut in a thicker piece above and below to help take up the space.
Here is catalog link:
Columbia Catalog 2010
...is that 40/100" in the
picture?...If so that would be more like 3/8" and not in the so called
"acceptable" warp range...
That is great news about different thickness of weatherstrip. I will follow up with them.
No, it is actually 241/100". Old dial calipers are read in 2 parts and summed (see attached photo for those interested in "dial caliper 101"):
1. The coarse reading down to 1/10, which in this case is 0.200", plus
2. The fine reading down to 1/1000, which in this case is about 0.041
Thanks yet again,