DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Windows and Doors > replacement window problem




Reply
 
Thread Tools Search this Thread Display Modes
Old 06-08-2011, 07:47 PM  
cameraman
Junior Member
registry_dropdown_22779_57770
 
Join Date: Jun 2011
Location: Mansfield, ohio
Posts: 2
Default replacement window problem

I have prism replacement windows. While cleaning I must have popped the upper window shaft out of the cam.and now the window has no tension and now will not stay up. How difficult is it to pop it back in .Can I just put it in place and then give it a tap with a mallet. Or does it require expertise and special tools?


cameraman is offline  
 
Reply With Quote
Old 06-09-2011, 01:49 AM  
oldognewtrick
Moderator
HRT_ADMIN.png
 
oldognewtrick's Avatar
registry_dropdown_15773_57775
 
Join Date: Jul 2009
Location: Nashville, TN
Posts: 6,937
Liked 667 Times on 547 Posts
Likes Given: 208

Default

Cameraman, you should be able to put the window in position without resorting to using a hammer. Make sure all the contact points are lined up correctly. If you start hitting it with a hammer, I'd suggest having a piece of plywood handy in cast you need to cover the new hole in the wall.


oldognewtrick is offline  
 
Reply With Quote
Old 06-09-2011, 04:30 AM  
joecaption
Senior Member
registry_dropdown_21184_57778
 
Join Date: Jan 2011
Location: Hartfield VA, VA
Posts: 1,500
Liked 82 Times on 67 Posts
Likes Given: 2

Default

Are you talking about the tentioner on the side of the window that's popped out? You should be able to just turn the window slightly and it should just snap back into place.
joecaption is offline  
 
Reply With Quote
Old 06-09-2011, 07:55 AM  
cameraman
Junior Member
registry_dropdown_22779_57782
 
Join Date: Jun 2011
Location: Mansfield, ohio
Posts: 2
Default replacementwindows

You guys were right it was two minute job.The line of work I was in before I retired required planning ahead 4 or 5 steps.Which leads to complicating simple jobs
Thanks
cameraman is offline  
 
Reply With Quote
Old 06-09-2011, 04:48 PM  
oldognewtrick
Moderator
HRT_ADMIN.png
 
oldognewtrick's Avatar
registry_dropdown_15773_57798
 
Join Date: Jul 2009
Location: Nashville, TN
Posts: 6,937
Liked 667 Times on 547 Posts
Likes Given: 208

Default

Quote:
Originally Posted by cameraman View Post
You guys were right it was two minute job.The line of work I was in before I retired required planning ahead 4 or 5 steps.Which leads to complicating simple jobs
Thanks
I love happy endings


oldognewtrick is offline  
 
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
which first: exterior repaint or window replacement? siskin Painting Forum 4 11-04-2010 12:37 PM
which first: window replacement or exterior repaint? siskin Windows and Doors 3 09-20-2010 11:25 PM
Master bathroom replacement window danmiller3 Windows and Doors 2 09-27-2009 10:38 PM
need replacement window feedback markhammer Windows and Doors 2 10-11-2008 01:20 PM
Window Pane Replacement Questions BrotherJohn Windows and Doors 5 04-14-2008 06:12 PM

Newest Threads

LATEST SPONSOR DEALS