DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Windows and Doors > Aluminum Glass Window Replacement Help...




Reply
 
Thread Tools Search this Thread Display Modes
Old 08-11-2011, 10:10 PM  
ets
Junior Member
registry_dropdown_23476_59890
 
Join Date: Aug 2011
Location: gainesville, fl
Posts: 3
Default Aluminum Glass Window Replacement Help...

I'm renting a place and broke one glasses on a window, figured it would be cheaper to just do it myself.

I've cleared out the old glass and removed the gluey substance holding the glass. It seemed like only glue was holding the glass toward the interior and a plastic strip was holding it froum the exterior.





I had a glass piece cut out and purchased some sealant.

The problem is I don't really know what to do know.

Do I put glue (with the sealant) to the plastic strips and then put the sealant on the aluminum frame and push the glass with the plastic strip onto it?

Or do I put the sealant on the aluminum frame put the plastic strips and then put more sealant on the plastic where the glass would lay on them?

Or am I totally lost and need other direction? I'm looking to do this in the morning so any help would be appreciated. Thx in advance!


ets is offline  
 
Reply With Quote
Old 08-12-2011, 11:55 AM  
ets
Junior Member
registry_dropdown_23476_59926
 
Join Date: Aug 2011
Location: gainesville, fl
Posts: 3
Default

Maybe it would be better to ask is sealant the only thing I need to prevent the glass to fall out? I'm assuming the gluey substance is the sealant.


ets is offline  
 
Reply With Quote
Old 08-12-2011, 12:17 PM  
nealtw
Contractor
registry_dropdown_20526_59927
 
Join Date: Nov 2010
Location: Upper Fraser Valley, British Columbia
Posts: 12,870
Liked 1268 Times on 1118 Posts
Likes Given: 2129

Default

Not sure but I think you just put the sealer in the frame and push the glass into that and then replace the trim without sealer.
nealtw is offline  
 
Reply With Quote
Old 08-12-2011, 01:10 PM  
ets
Junior Member
registry_dropdown_23476_59930
 
Join Date: Aug 2011
Location: gainesville, fl
Posts: 3
Default

I was playing with google, and someone else said you don't use sealant on the trim. And sort of capitalized the DO NOT statement. Why wouldn't you?

I was examining the other sections of the window and they don't use sealant either on the trim side. Do you use sealant on the bottom of the trim that on the frame?

Last edited by ets; 08-12-2011 at 01:17 PM.
ets is offline  
 
Reply With Quote
Old 08-12-2011, 02:52 PM  
nealtw
Contractor
registry_dropdown_20526_59932
 
Join Date: Nov 2010
Location: Upper Fraser Valley, British Columbia
Posts: 12,870
Liked 1268 Times on 1118 Posts
Likes Given: 2129

Default

I wouldn't, just replace what you found when you took it out.


nealtw is offline  
 
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Correct way to install aluminum window capping? DavesHammer Windows and Doors 4 06-03-2012 02:10 PM
glass block window notaplumber Bricks, Masonry and Concrete 1 02-24-2011 07:17 AM
Vent through glass block window? Salterian Bricks, Masonry and Concrete 3 10-01-2009 08:01 PM
Replacement window - Flaw in glass StrayKatt Windows and Doors 1 08-24-2009 03:40 PM
Steel & aluminum window/door frames get very frosty Quattro Windows and Doors 2 02-13-2008 02:03 PM

Newest Threads

LATEST SPONSOR DEALS