DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Plumbing Forum > Adding a utility Sink




Reply
 
Thread Tools Search this Thread Display Modes
Old 11-13-2011, 06:47 PM  
Redwood
Certified Lunatic
 
Redwood's Avatar
Join Date: Apr 2009
Location: Olde Tyme, Connecticut
Posts: 887
Default

Something like this would work...



utility sink and washer.png  
Redwood is offline  
 
Reply With Quote
Old 11-13-2011, 07:47 PM  
ME87
Member
 
ME87's Avatar
Join Date: Nov 2011
Location: Tucson, Arizona
Posts: 33
Default

Looks pretty straight forward. My only real issue I see is how to get the new plumbing in place of the old plumbing with the bottom piece fixed in the ground and the vertical vent fixed as well. Is there a trick to this?


__________________
Just your average 24 year old
ME87 is offline  
 
Reply With Quote
Old 11-13-2011, 07:57 PM  
Redwood
Certified Lunatic
 
Redwood's Avatar
Join Date: Apr 2009
Location: Olde Tyme, Connecticut
Posts: 887
Default

Can you post a picture of the bottom?
Redwood is offline  
 
Reply With Quote
Old 11-13-2011, 08:03 PM  
ME87
Member
 
ME87's Avatar
Join Date: Nov 2011
Location: Tucson, Arizona
Posts: 33
Default

__________________
Just your average 24 year old
ME87 is offline  
 
Reply With Quote
Old 11-13-2011, 09:09 PM  
Redwood
Certified Lunatic
 
Redwood's Avatar
Join Date: Apr 2009
Location: Olde Tyme, Connecticut
Posts: 887
Default

Okay you should have enough room at the bottom to cut the pipe below the sani-tee for the washer standpipe. Calculate where you want the utility sink drain to come in and make the cut. You can run a dogleg on the sink drain after the vent on the drain side...

Cut up above for the vent and if you don't have enough wiggle to connect using the socket on the vent sani-tee then use a banded coupling such as a Fernco Pro-Flex...
Redwood is offline  
 
Reply With Quote
Old 11-19-2011, 09:50 PM  
ME87
Member
 
ME87's Avatar
Join Date: Nov 2011
Location: Tucson, Arizona
Posts: 33
Default

O.k. I was out of town all week so I didn't make any progress, but I did knock out the drain side plumbing this afternoon. I'll take care of the water side tomorrow and hook up the sink to make sure everything works and then I'll be back onto the drywall. Thanks for all the help. I'll post completed pictures.

__________________
Just your average 24 year old
ME87 is offline  
 
Reply With Quote
Old 11-20-2011, 09:06 PM  
ME87
Member
 
ME87's Avatar
Join Date: Nov 2011
Location: Tucson, Arizona
Posts: 33
Default

Just have to put all the drywall back together. No leaks, everything drains. Thanks for all the help

__________________
Just your average 24 year old
ME87 is offline  
 
Reply With Quote
Old 11-21-2011, 10:56 AM  
Redwood
Certified Lunatic
 
Redwood's Avatar
Join Date: Apr 2009
Location: Olde Tyme, Connecticut
Posts: 887
Default

Okay, a couple of notes, not too bad though...

You installed a sani-tee on its back on the sink waste line vs a wye and 45 or, combo.

The sani-tee connecting the vent at the top is reversed.

You installed a drop in the drain after the trap and before the vent causing an s-trap to be created.

You used rubber Fernco Couplings vs the banded couplings I suggested like the Fernco Proflex series.
Redwood is offline  
 
Reply With Quote
Old 11-21-2011, 11:17 AM  
ME87
Member
 
ME87's Avatar
Join Date: Nov 2011
Location: Tucson, Arizona
Posts: 33
Default

I did end up fixing the drop in the drain so that isn't a problem, and I did swap out the couplings, so that one was fixed as well. Not sure if I'll address the other issues.
__________________
Just your average 24 year old
ME87 is offline  
 
Reply With Quote
Old 11-21-2011, 11:56 AM  
nealtw
Contractor
Join Date: Nov 2010
Location: Upper Fraser Valley, British Columbia
Posts: 13,840
Liked 1400 Times on 1234 Posts
Likes Given: 2420

Default

You may want to move elec. plug too.


nealtw is online now  
 
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
putting a utility sink in basement sisyphus Plumbing Forum 3 10-04-2011 08:41 AM
Can I temporarily connect my dishwasher in utility room while remodeling kitchen? ilyaz General Home Improvement Discussion 2 01-19-2010 08:19 AM
What do you hate most about your utility knife? chris1010 Tools 13 01-13-2008 09:35 PM
adding 4-way switch bethany14 Electrical and Wiring 5 01-12-2007 06:32 PM
Ridgid Miter Saw Utility Vehicle - $99 MoJoe Tools 3 03-15-2006 04:45 PM

Newest Threads

LATEST SPONSOR DEALS