DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > General Home Improvement Discussion > newbie here




Reply
 
Thread Tools Search this Thread Display Modes
Old 09-04-2006, 04:41 PM  
hubbyandme
Junior Member
 
Join Date: Sep 2006
Posts: 2
Default newbie here

Hello:
Hubby and I were talking about our 2 bathrooms and whether or not we could update them. He's REALLY handy - plumbing, electrical, etc. We've finished two basements and we're still married!

Our house is about 25 years old and both bathrooms are clean but dated. One has a tub/shower, tiled with 6" x 6" tiles on the walls and ceiling of the tub area as well as going out and half-way up the 3 walls around the toilet. The other bathroom has a shower stall with the same 6" x 6" tiles and 1" x 1" tiles on the floor of the shower. No problem for us to do new cabinets (sinks and taps are fine) but how easy is it to put in one of those 'bathfitter' units? The tub is actually OK - it's the tiles we would like to cover. We live in the country and have hard water softened with a water softener (hence, calcium, lime, salt and a bit of mildew). We would really like to avoid taking out all that tile (we did it in the first house and it wasn't fun ) and simply put the new unit in over it. I know we would have to kill the mildew before covering it but ... is it something we should even consider doing ourselves?

Has anyone done this?



__________________
hubbyandme is offline  
 
Reply With Quote Quick reply to this message
Old 09-14-2006, 10:29 PM  
bathman
Junior Member
 
Join Date: Sep 2006
Posts: 3
Send a message via MSN to bathman
Default

yes rebath is far better than bathfitter. go to complaints.com and read about bathfitter. cracking in the corners. rebath has the largest selection of colors and styles. the complaint on here about rebath is a very rare complaint. there must be more to the story. rebath LLC always makes sure things are right.

kv



__________________
bathman is offline  
 
Reply With Quote Quick reply to this message
Old 03-06-2007, 04:43 PM  
eclypes2002
Junior Member
 
Join Date: Mar 2007
Posts: 3
Default

rebath is not better it has a better design and format but bows and comes undone, i hope you have not purchased there product i use to be a manager for them. let me tell you if you have any questions feel free to email me.

__________________
eclypes2002 is offline  
 
Reply With Quote Quick reply to this message
Old 03-06-2007, 09:28 PM  
beitasitmay
Junior Member
 
Join Date: Mar 2007
Posts: 6
Default Tile be gone

I dont recommend going over anything with anything being a professional. I can however recommend a faster method of removal.

Just yesterday I took out a "saws all" with a new wood blade and cut out the corner seems on a tile tub from 1960. In three minutes I made the corner cuts. Over the next 20 minutes my wife and I removed sections of the tiled tub. Some of the peices were 2'X4' or larger and very heavy. Once you get a cut around the tile with the saws all then hit a starting point in the tile with a hammer. Hand pull the tile sections out from there.
IN SIMPLE YOU MUST REMOVE THE TILE. You will feel better about it after you go thruough the hell. You can live with yourself.

NOTE: TILE is dangerous. Wear your safety glasses as the tiny peices can fly up in your face when you bang tile with a hammer. This is not a request its an order!

You must bust through the tile and the underlayment to get a grip. The underlayment most times is tile, mortar, then mesh wire with 1960s mortar in it. Hats off to the sixties they even put a layer of tar paper after that to make it efficient. Head bow for the overwork.....

You may get lucky and only find your tile with a sheetrock base behind it. I bow to you if that happens.......

__________________
beitasitmay is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Newbie Grp Solutions General Home Improvement Discussion 0 08-02-2008 04:50 PM
Can you help a newbie renovate the bathroom shower? cyancat General Home Improvement Discussion 16 05-30-2008 07:47 AM
Newbie installing a new sink. Please help! newplayer Plumbing Forum 4 09-10-2007 12:19 PM
Newbie to put in ceiling fan! - wiring not grounded? operaflute Electrical and Wiring 6 03-18-2007 11:50 PM
Seeking newbie guide to carpentry neophase Carpentry and Woodworking 5 04-04-2006 11:46 PM

Newest Threads

LATEST SPONSOR DEALS