DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Insulation and Radiant Barriers > Condensation under cooler window rotting wood.

Help Support House Repair Talk by donating using the link above.
Thread Tools Search this Thread
Old 03-09-2012, 12:30 PM  
Join Date: Mar 2012
Posts: 46
Liked 6 Times on 4 Posts
Likes Given: 6


It's safe to say that I don't have a lot of experience in home improvement.

I need help!

My dad owns a flowers shop where he has a cooler for the flowers. The cooler has a display window and water is forming and rotting a horizontal support beam directly under the glass window. You can't see the rotted wood from the photos because the beam is in the wall, directly under the glass. I think it's supporting the glass. The white beam you see in the photo is fine and not rotted.

Below the window, a lot of the wall was rotted out, so my dad ripped the wood out and replaced a couple of vertical 2by4s. It doesn't look very good, but he said that the wet wood needed to breathe, so he left a gap right below the window so air could circulate. He just used some thin sheet wood to cover it up.

My plan was to take that all out and replace the vertical 2by4s. I wanted to throw away all of the fluffy insulation and replace it with thick foam insulation board that is moisture proof. Then, I would cover it in plastic. Next, I would cut a piece of wood to fit the open space, seal it off and paint it. This was the plan before I knew about the rotting horizontal beam. Should I replace it? If I seal it off will it just keep rotting? Is there water proof wood? If it does need to breathe should I install some kind of metal vent? I was thinking about installing a metal grill of some kind into the wall so that the air could circulate.

The source of the water is the cooler. You can touch the glass and tell that it's wet and condensation. It's always wet. My guess is that the water is dripping down and collecting on that horizontal beam that is below the glass.


Click image for larger version

Name:	image-1405323926.jpg
Views:	228
Size:	41.6 KB
ID:	3689   Click image for larger version

Name:	image-1921814828.jpg
Views:	226
Size:	35.5 KB
ID:	3690   Click image for larger version

Name:	image-2947070519.jpg
Views:	195
Size:	34.6 KB
ID:	3691   Click image for larger version

Name:	photo 1.jpg
Views:	202
Size:	37.0 KB
ID:	3695   Click image for larger version

Name:	photo 2.jpg
Views:	189
Size:	29.6 KB
ID:	3696  

Click image for larger version

Name:	photo 3.jpg
Views:	195
Size:	28.7 KB
ID:	3697  
drw158 is offline  
Reply With Quote
Old 05-31-2012, 12:23 AM  
Contractor retired
nealtw's Avatar
Join Date: Nov 2010
Location: Upper Fraser Valley, British Columbia
Posts: 23,564
Liked 2991 Times on 2620 Posts
Likes Given: 4921


drw158: Not sure why this question was missed when you posted it, better late than never and welcome to the site.
Who ever built this room was looking for some that looks nice but didn't follow good practice. If you haven't addressed this yet it should all be ripped out including the window and replace the window with a double glaised with vinyl frame install just as it would be installed in a house. The water will continue to condence in the area and mold will grow.
This is a health issue for the customers but mostly the people that are there all the time like your dad.
nealtw is online now  
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
Rotting wood around door Tellebot Carpentry and Woodworking 29 07-03-2016 09:53 PM
Outside window frame rotting rymer Windows and Doors 5 05-15-2016 09:44 PM
Wood Window Blinds? mcmakotomc Windows and Doors 8 01-06-2016 01:10 PM
Double pane window condensation jay11235 HVAC 0 12-19-2008 01:34 PM
Can't drill in window wood, what now? bigb Windows and Doors 2 07-03-2007 08:51 AM