DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Bricks, Masonry and Concrete > Dissolving Old Concrete




Reply
 
Thread Tools Search this Thread Display Modes
Old 05-01-2012, 08:05 AM  
SilverBee
Odd Questions
 
Join Date: May 2012
Posts: 2
Default Dissolving Old Concrete

I am a bonsai artist. Recently, I discovered a real treasure at an estate sale--a set of three bonsai pots. One of them had been filled with concrete and large pebbles to make it a heavy base for artificial trees. I want to remove the concrete. The pot is of fired clay with fired glaze. The inside, where the concrete sits, is not glazed. I'd rather not take a hammer and chisel to it. I read where muriatic acid could work if the concrete was not more than 28 days old; however this is definitely old concrete. Help, please!

The photo is an example of the kind of pot involved.



Blue Glazed Pot.JPG  
__________________

Last edited by SilverBee; 05-01-2012 at 08:14 AM. Reason: Add photo.
SilverBee is offline  
 
Reply With Quote Quick reply to this message
Old 05-01-2012, 08:28 AM  
JoeD
Contractor
 
Join Date: Mar 2006
Location: Welland, Ontario
Posts: 991
Liked 109 Times on 89 Posts
Likes Given: 4

Default

Noting will dissolve the concrete. Try drilling holes into it. Lots of holes and then you might be able to chip the concrete out.



__________________
JoeD is offline  
 
Reply With Quote Quick reply to this message
Old 05-02-2012, 05:59 AM  
SilverBee
Odd Questions
 
Join Date: May 2012
Posts: 2
Default Dissolving Old Concrete

Thanks for the answer, Joe--even though it wasn't what I'd hoped to hear.
It's the largest of the three pots with the concrete. The other two have been used the same way but seem to have a soft substance that will chip out fairly easily, so it's not a total loss.

__________________

Last edited by SilverBee; 05-02-2012 at 06:00 AM. Reason: Add text.
SilverBee is offline  
 
Reply With Quote Quick reply to this message
Old 05-02-2012, 07:50 AM  
nealtw
Contractor
 
Join Date: Nov 2010
Location: vancouver, b.c.
Posts: 10,980
Liked 964 Times on 857 Posts
Likes Given: 1650

Default

I agree with Joe, whittling at it with a small carbide drill should loosen it up

__________________
nealtw is offline  
 
Reply With Quote Quick reply to this message
Reply


Quick Reply
Message:
Options

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
? epoxy agg or decorative concrete over existing concrete - seeking advice mmrradd Bricks, Masonry and Concrete 3 05-31-2009 08:31 PM

Newest Threads

LATEST SPONSOR DEALS