DIY Home Improvement, Remodeling & Repair Forum > DIY Home Improvement > Plumbing Forum > quick fix for shower pan crack




Reply
 
Thread Tools Search this Thread Display Modes
Old 09-06-2012, 11:48 PM  
minimii
Junior Member
registry_dropdown_24870_76843
 
Join Date: Dec 2011
Posts: 27
Default quick fix for shower pan crack

Our shower is leaking. I opened up the ceiling under stair under where the show pan is and cut out part of the subfloor. I can see some cracks about 1/2"x2", as in the attached image. The top of the cut in the picture is the edge of the shower pan. This old show pan seems made of aluminum or tin.

We are not ready to totally replace the shower right now. We plan to tear down the bed room and bath room and totally redo the whole floor in about two years. So I only need a fix that would last about two years.

Should I use solder to fix the hole in the lower right part as in the photo? What should I use to fix those crack?

Thanks,


showerpan.jpg  
minimii is offline  
 
Reply With Quote
Old 09-07-2012, 10:25 AM  
joecaption
Senior Member
registry_dropdown_21184_76854
 
Join Date: Jan 2011
Location: Hartfield VA, VA
Posts: 1,476
Liked 76 Times on 62 Posts
Likes Given: 2

Default

Post a picture of inside the tub area.
Trying to fix it from below will never work.
If it's an old house then most likly it's lead.
That's just a metal liner under that ever they used under the tub, tile?
Sealing that will just form a pond trapping water which will just find another way out and form mold between the pan and what ever is above it.


joecaption is offline  
 
Reply With Quote
Old 09-07-2012, 01:19 PM  
JoeD
Contractor
registry_dropdown_728_76856
 
Join Date: Mar 2006
Location: Welland, Ontario
Posts: 1,063
Liked 125 Times on 101 Posts
Likes Given: 4

Default

Hot glue gun.
JoeD is offline  
 
Reply With Quote
Old 09-07-2012, 04:42 PM  
nealtw
Contractor
registry_dropdown_20526_76865
 
Join Date: Nov 2010
Location: Upper Fraser Valley, British Columbia
Posts: 12,953
Liked 1281 Times on 1127 Posts
Likes Given: 2146

Default

Reshape the lead around the hole so the water drips there and dosn't run somewhere else and hang a bucket under it.
nealtw is online now  
 
Reply With Quote
Old 09-08-2012, 11:42 AM  
joecaption
Senior Member
registry_dropdown_21184_76882
 
Join Date: Jan 2011
Location: Hartfield VA, VA
Posts: 1,476
Liked 76 Times on 62 Posts
Likes Given: 2

Default

To fix it is going to involve gutting the whole pan from above.
joecaption is offline  
 
Reply With Quote
Old 09-08-2012, 11:36 PM  
CallMeVilla
Contractor
 
CallMeVilla's Avatar
registry_dropdown_17830_76895
 
Join Date: Feb 2010
Location: San Diego
Posts: 1,426
Liked 465 Times on 357 Posts
Likes Given: 196

Default

How is the water reaching the pan? It should be directed to the drain. If the drain is shot, then you are looking at a crummy situation involving on-going leakage.

Since you will be re-doing the shower, can you grout all cracks, grout the floor itself, and apply sealant to all seams -- including the seam around the drain? This might serve as a temporary fix until you pop for the full remodel.

Not a pretty solution . . . but it is temporary, right?
CallMeVilla is offline  
 
Reply With Quote
Old 09-10-2012, 07:52 AM  
JoeD
Contractor
registry_dropdown_728_76930
 
Join Date: Mar 2006
Location: Welland, Ontario
Posts: 1,063
Liked 125 Times on 101 Posts
Likes Given: 4

Default

How about that spray stuff I see the guy seal a screen door with and use as boat. It is temporary.
JoeD is offline  
 
Reply With Quote
Old 09-10-2012, 05:20 PM  
nealtw
Contractor
registry_dropdown_20526_76953
 
Join Date: Nov 2010
Location: Upper Fraser Valley, British Columbia
Posts: 12,953
Liked 1281 Times on 1127 Posts
Likes Given: 2146

Default

Joe: I would like to see that boat close up.
nealtw is online now  
 
Reply With Quote
Old 09-11-2012, 12:10 PM  
JoeD
Contractor
registry_dropdown_728_76974
 
Join Date: Mar 2006
Location: Welland, Ontario
Posts: 1,063
Liked 125 Times on 101 Posts
Likes Given: 4

Default

JoeD is offline  
 
Reply With Quote
Old 09-11-2012, 06:43 PM  
nealtw
Contractor
registry_dropdown_20526_76982
 
Join Date: Nov 2010
Location: Upper Fraser Valley, British Columbia
Posts: 12,953
Liked 1281 Times on 1127 Posts
Likes Given: 2146

Default

Sorry Joe: still a none beleiver, just the fact that there is no buldge in the screen when it is on the water. Just aint going to happen.


nealtw is online now  
 
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter DIY Home Repair Forum Replies Last Post
New here! Quick question. tmichelsons General Home Improvement Discussion 6 06-20-2011 10:55 AM
Is it a foreclosure or quick-sand? AlwaysOneMoreProject Introductions 4 10-29-2010 08:56 AM
quick question hoarea Electrical and Wiring 17 02-21-2008 05:05 AM
Quick Survey Travers Carpentry and Woodworking 0 12-18-2006 03:40 PM
the quick and the dead jcambece General Chit-Chat 0 05-31-2006 11:33 AM

Newest Threads

LATEST SPONSOR DEALS