Tying my ejector pump 2" line into DWV. I have attached a picture of a cleanout in the 3" line very close to where the pump is located. The 2" line from the pump will be higher than this cleanout plug before I make the 90 degree turn towards the waste line. Will this be a good option to cutting into the DWV pipe a few feet down with a 2" sanitary/3" coupling with FERNCO fittings?
I found a 3" slip coupling while picking out all my fittings. It worked great. Better than messing with the clean out. I used the slip coupling and took back the Fernco rubber fittings. Slip coupling definitely the way to go